WORK DESCRIPTION FOR FIELD MEASURE Code: 22P5496206 Version: 2.0 Update driver display, front passenger display, and central display control unit software  Model 297 with code 535 Ensure use of XENTRY Diagnosis version 06/2022 or higher. Before starting the work procedure, install the current version of all add-ons in XENTRY Diagnosis. Make sure to … Read more
WORK DESCRIPTION FOR FIELD MEASURE Code: 22P8890004 Version: 2.0 Check that rear switch module (N38) is present, replace if necessary and/or perform SCN coding Model 206 Always use the latest XENTRY Diagnosis software release with all available add-ons. Make sure to follow the operation steps exactly as described in XENTRY Diagnosis. Use a charger to … Read more
WORK DESCRIPTION FOR FIELD MEASURE Code: 23P5499318 Version: 2.0 Update ESP control unit software Model 297 Always use the latest XENTRY Diagnosis software release with all available add-ons. Make sure to follow the operation steps exactly as described in XENTRY Diagnosis. Use a charger to ensure sufficient power supply of the 12 V on-board electrical … Read more
WORK DESCRIPTION FOR FIELD MEASURE Code: 23P6192003 Version: 2.0 Rework carrier for rear bumper Model 294 Work procedure Remove rear bumper. For basic information, see AR88.20-P-2200EQU. Clean affected areas (A, arrows, Figure 1) at weld seams of carrier for rear bumper (1, Figure 1). For example with silicone remover. Apply activator … Read more
WORK DESCRIPTION FOR FIELD MEASURE Code: 23P6393003 Version: 2.0 Check inner right side wall for crack, rework if necessary Model 295 Check/test procedure Remove charger socket recess. For basic information, see AR88.60-P-0005EQE. Check affected area (A, Figure 1) on inner right side wall for crack. a. Area (A, Figure 1) on inner … Read more