WORK DESCRIPTION FOR FIELD MEASURE
Code: 20P3293022
Version: 2.0
Check seal bellows at wheel carrier supporting joint of left and right rear axle, replace if necessary
Model 205; 253
Check/test procedure
- Lift vehicle on vehicle lift and check both seal bellows (A, figure 1) of supporting joint in left and right wheel carrier for damage. The test shall be performed on the right and left wheel carrier.
Figure 1 (Shown on right side)
-
- Visible damage present: Perform work procedure.
- Visible damage not present: End measure.
Work procedure
Only if visible damage is present.
1. Replace affected supporting joint.
For basic data, see AR35.20-P-0116LW.
Perform wheel alignment check.
Parts
| Quantity | Designation | Part no. |
| As required* | Joint | A 204 352 00 27 |
* The bolts and nuts must be determined according to the equipment variant for the vehicle identification number via the parts process in the Xentry Portal!
Small parts such as screws/bolts, lock nuts, sealing rings, cable ties, fluids, sealant etc. are not listed in the parts list. The required small parts are taken into account in the budgeting.
Operation text and flat rate
| Operation no. | Operation text | Flat rate | Accounting no./ damage code |
| 02-1675 | Check seal bellows at outer bearing of supporting joint for left and right spring link of rear axle | 0.1 hours | 32 930 22 |
| 02-1676 * | Replace outer bearing of supporting joint for spring link of rear axle (after check) | 1.6 hours | 32 930 22 |
| 02-1677 | Extra work for: Replace outer bearing of supporting joint for spring link of rear axle in veh. with AIRMATIC | 0.2 hours | 32 930 22 |
| 02-9785 | Operations: Perform wheel alignment check | 0.9 hours | 32 930 22 |
* The operation item is to be repeated as often as necessary.
Mercedes-Benz
Global Service & Parts
Check Seal Bellows at Wheel Carrier
Model GLC-Class (253 platform)
Model Year 2020
Bestseller No. 1
OMT Ball Joint Press Kit, Ball Joint Removal Tool with 4x4 Adapters
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
Bestseller No. 2
OMT Ball Joint Press Kit, Ball Joint Removal Tool with 4x4 Adapters
- EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
- UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
- PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
- ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization.
Bestseller No. 3
OMT 23pc Master Ball Joint Press Kit with Sockets and Adapters
- Handle Ball Joints with Ease: Orion Motor Tech's 23pc ball joint removal tool kit lets you quickly and easily remove and install stubborn press-fit parts, including ball joints, U joints, and brake anchor pins.
- Easily Repair Your Chryslers: Our specially designed 4-point sockets (1-59/64 in. & 2-9/64 in.) are tailored to fit numerous Chrysler vehicles, ensuring a secure and accurate fit when removing and installing their uniquely threaded upper ball joints.
- Gentle on Your Vehicle: Our 9 inch C-frame press with a 6 inch opening and an extra-long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
- Universal Compatibility: Our ball joint tool kit works with most 2WD and FWD vehicles, including GM, Chrysler, Ford, Jeep, Dodge, and more, thanks to its versatile receiving tubes and adapters.
- Engineered for Durability: Our ball joint press kit is crafted from premium AISI 1045 carbon steel, carefully forged and blackened to ensure superior strength and excellent corrosion resistance.
SaleBestseller No. 4
OMT Ball Joint Press Kit, Ball Joint Removal Tool with 4x4 Adapters
- 1, EASY OPERATION: The ORION MOTOR TECH Ball Joint Press Set with 4x4 Adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
- 2, UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
- 3, PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
- 4, ALL-IN-ONE TOOL SET: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- 5,PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
Bestseller No. 5
ATPEAM 10pcs Ball Joint Press Kit U Joint Removal Tool with 4x4 Adapters
- Premium Quality: This ball joint tool kit is made of solid carbon steel with anti-rust finish, perfect for removal/installation of press-fit parts, such as ball joints, universal joint and truck brake anchor pins.
- Easy To Use: It will help you effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins without removing the control arm from the vehicle. Besides, this tool kit can also remove rusted and corroded parts. Really save your energy and time in daily life.
- Package Included: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- Wide Application: The heavy duty 4-wheel drive ball joint tool is compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars. It allows service for 1/2 and 3/4 ton 4WD vehicles
- Blow Storage Case: The Ball Joint Press set is packed in a heavy-duty, storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
This product presentation was made with AAWP plugin.