Inspect Propeller Shaft Check Strap on Crossmember – 2019-2023 Mercedes-Benz Sprinter

2023 Mercedes-Benz Sprinter

DATE: March, 2024 2024020015 Inspect Propeller Shaft Check Strap on Crossmember This is to notify you of a Service Campaign to inspect the propeller shaft check strap on crossmember on approximately  81 MY 2019-2023 Mercedes-Benz Sprinter Vans.  All affected VINs will be flagged as “OPEN” in VMI   Issue Mercedes-Benz AG, the manufacturer of SprinterRead more

Wax Inside of Integral Carrier – 2023-2024 Mercedes-Benz EQE

2024 Mercedes-Benz EQE

March 15, 2024 2024020011 Wax Inside of Integral Carrier This is to notify you of the Service Campaign Launch to install preservation wax on the inside of the integral carrier on 3,638 Model Year (“MY”) 2023-2024 EQE Sedan (295 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on March 15, … Read more

Rework Side Wall on Longitudinal Member on Right and Left – 2024 Mercedes-Benz CLE

2024 Mercedes-Benz CLE

WORK DESCRIPTION FOR FIELD MEASURE Code: 24P6392004 Version: 1.0   Rework side wall on longitudinal member on right and left Model 236    Work procedure  Remove longitudinal member panel on right and left. For basic data, see AR88.80-P-6000WEB.   Clean affected area (A, Figure 1) and treat with activator. Then seal with transparent seam seal. … Read more

Check Cushions in Rear for Soiling or Discoloration – 2023 Mercedes-Benz S-Class Maybach

2023 Mercedes-Benz S-Class Maybach

WORK DESCRIPTION FOR FIELD MEASURE Code: 23P6892005 Version: 2.0   Check additional cushions for leg rest in rear passenger compartment for soiling or discoloration and replace if necessary Model 223 Maybach Haute Voiture   Check/test procedure Check whether the additional cushions for the leg rest in the rear passenger compartment of the vehicle are soiled/discolored. … Read more

Rework Seam Seal in Area of Hinge on Right of Rear-end Door – 2022 Mercedes-Benz EQS

2022 Mercedes-Benz EQS-Class

WORK DESCRIPTION FOR FIELD MEASURE Code: 23P7493001 Version: 2.0   Rework seam seal in area of hinge on right of rear-end door Model 297   Work procedure  Remove covers (A, Figure 1) on water channel at top and on right side.   Clean the area marked with arrows (Figure 2) on the seam seal and … Read more