WORK DESCRIPTION FOR FIELD MEASURE
Code: 22P3290105
Version: 2.0
Check upper transverse control arm of front axle on left and right, replace upper transverse control arm if necessary
Model 167
Check/test procedure
- Remove left and right front wheel and tire assembly. For basic data, see AR40.10-P-1102ME
- Remove nut (2, Figure 1) at upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME
- Check spherical cap in area (A, Figure 2).
a. If groove (B, Figure 2 or 3) is not present : Carry out work procedure .
b. If groove (B, Figure 2 or 3) is present: End measure.
Work procedure
- Replace upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME.
- Assemble in reverse order.
Parts
| Quantity | Designation | Part no. |
| As required | Upper transverse control arm | * |
* The required transverse control arm must be determined via the parts job in the XENTRY Portal for the vehicle identification number
Upper Transverse Control Arm
GLE350W,GLE350W4,GLE450W4,GLE53W4,GLS450W4
Model Year 2022-2022
- 🛠️【Product Usage】Quickly and easily Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings, fits for automobiles and LCVs.
- 📦【Products include】30 x sleeves; 5 x pulling spindle M10, M12, M14, M16; 5 x Stop plate discs adapter
- 📏【Outside Diameter/Inside Diameter】32/22、34/24、36/26、38/28、40/30、42/32、44/34、46/36、48/38、50/40, 52/42、54/44、56/46、58/48、60/50、62/52、64/54、66/56、68/58、70/60、72/62、72/62、74/64、76/66、78/68、80/70、82/72、85/75、87/77、90/80
- 💎【Material】Forged by Alloy steel, Rugged and durable. Can withstand 3500N. At the same time, it has durability and corrosion resistance.
- 🌹【Excellent Service】We are committed to providing the best professional tools and the best service for auto repair. If you have any questions, please don't hesitate to contact us. We provide 24-hour before and after-sales service.
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
- Versatile Bushing Removal Tool: This pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings, and seals on most cars with an LCV or HGV engine
- Universal Press and Pull Sleeve Kit: This complete bushing press kit includes 22 sleeves with a bore diameter ranging from 34 to 80 mm and 5 pulling shafts in the sizes of M10, M12, M14, M16, and M18, fitting a variety of wrenches and drivers
- Notched Sleeve Design: Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on
- Durable Construction: Made of premium carbon steel, this press sleeve kit provides strong and dependable long-lasting service; the pulling spindles are heat treated and blackened for superior strength and corrosion resistance
- Compact & Portable: This 27 piece bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop
- The 27 Pieces of Press and Pull Sleeve Kit is designed for removal and installation of all types of bearings, bushes and seals. It is designed to remove and install bearings including Silent Bearings, Hydraulic Bearings, Bearing Bushes, Ball Bearings, Shaft Seals, Rubber Bearings and many more. It is crafted to remove bushes, bearing or seals without the need of a press and to reduce the possibility of damaging the bearings/suspension housings.
- Tool Press and Pull Sleeve Kit can also be used with a workshop press if required. This press kit contains a unique design with U-Plot on each sleeve for operator to easy visual inspect removal and installation. The spindles have thrust bearings fitted to both ends making the extracting and installing much easier. The end caps are also double sided making them a universal fit for the sleeves
- This professional pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal and installation of bushes, bearings and seals.
- 22 Sleeves Material: 40 CR.; 5*pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18.
- Specifications: 1. Press Sleeves Side Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80mm Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90mm 2. Pulling Spindles with Thrust Bearings: M10, M12, M14, M16, M18 3. Dimensions: (18.11 x 4.13 x 14.37)" / (46 x 10.5 x 36.5) cm (L x W x H) 4. Weight: 615.17oz / 17.44kg
- Versatile Bushing Removal Tool: This 27 pc. pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings, and seals on most cars with an LCV or HGV engine
- Covers Most Common Sizes: Our complete bushing press kit comes with 22 sleeves sized from 34 to 80 mm for broad application. It also includes 5 pulling spindles in sizes M10, M12, M14, M16, and M18, compatible with a wide range of wrenches and drivers
- Notched Sleeve Design: Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on
- Durable Construction: Made of premium AISI 1045 steel, this press sleeve kit provides strong and dependable long-lasting service. The pulling spindles are heat treated and blackened for superior strength and corrosion resistance
- Compact & Portable: Our bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop
SEOCONTENT-START
WORK DESCRIPTION FOR FIELD MEASURE 1/2 Field measure management GSP/TPR Code: 22P3290105 Version: 2.0 Check upper transverse control arm of front axle on left and right, replace upper transverse control arm if necessary Model 167 Check/test procedure 1. Remove left and right front wheel and tire assembly. For basic data, see AR40.10-P-1102ME 2. Remove nut (2, Figure 1) at upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME Figure 1 3. Check spherical cap in area (A, Figure 2). clean area. Do not damage air bellows while doing this. Figure 2 A Code: 22P3290105 Version: 2.0 2/2 Field measure management GSP/TPR Figure 3 a. If groove (B, Figure 2 or 3) is not present : Carry out work procedure . b. If groove (B, Figure 2 or 3) is present:End measure. Work procedure 1. Replace upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME. 2. Assemble in reverse order. Parts Quantity Designation Part no. As required Upper transverse control arm * * The required transverse control arm must be determined via the parts job in the XENTRY Portal for the vehicle identification number Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting. Operation text and flat rate Operation no. Operation text Flat rate Accounting no./ damage code 12-1655 Check upper transverse control arm on left and right of front axle 12-1656 Replace upper transverse control arm of front axle (after check) 1.0 h 32 901 05 4.3 h 32 901 05 Mercedes-Benz Global Service & Parts
SEOCONTENT-END
This product presentation was made with AAWP plugin.