TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services |
| RE: Stop Sale for Pending Emission Modification Certain MY 11-12 Diesel vehicles | DATE: March 18, 2022 |
IMPORTANT PENDING EMISSION MODIFICATION NOTIFICATION with STOP SALE – 22P2197470
Attention Dealership Management
Mercedes-Benz USA, LLC (“MBUSA”) has entered into an agreement with the United States Department of Justice (DOJ), the Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and the California Attorney General’s Office (CA AG) regarding the emission control system in certain Mercedes-Benz diesel vehicles. As part of this agreement, MBUSA will offer field measures referred to as the Approved Emission Modification (“AEM”) for the affected vehicles. As a result, certain vehicles covered under this notification cannot be sold or caused to be sold, or leased or caused to be leased, or introduced into commerce, or exported from the United States to another country, until after the AEM described in this notification is performed.
This notification hereby instructs Dealers not to sell or cause to be sold, or lease or cause to be leased, or introduce into commerce, or export from the United States to another country, any vehicle covered by this notification until after the AEM described in this notification is performed. Failure to adhere to these instructions may result in penalties or fines.
- Please ensure that every dealership associate is aware of this stop sale notification.
- Refer to VMI in NetStar to determine which units in your inventory are affected by this stop sale with a description of 22P2197470.
- Once the AEM has launched, you will receive further instructions at that time via the normal communication channels (NetStar).
- MBUSA will compensate affected dealers with an allowance to support the estimated costs associated with floorplan and depreciation of the affected vehicles. The support allowance will be $250 per vehicle, per month. Dealers will receive payment every month for the affected vehicles until the launch of the AEM.
- Once the AEM has launched for the affected vehicles, the support allowance will cease. Furthermore, please note that the support allowance is expressly contingent upon the dealers’ adherence to the prohibition against selling, leasing, introducing into commerce or exporting any vehicle covered by this notification.
- Dealer payments will be processed via Miscellaneous Billing (Parts Consolidated Statement) at the end of each month. Vehicles that enter dealer inventory after the stop sale date will not be eligible for stop sale support allowance. For all questions pertaining to the stop sale support allowance, please contact your Sales Operations Manager.
Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-367-6372.
Sincerely,
Gregory Gunther
Department Manager, Vehicle Compliance & Analysis
| Pending Emission Modification Notification | March 18, 2022 | ||
| Campaign No.: | EMC# | Campaign Desc. : | STOP SALE: Pending Emission Modification |
| N/A | 8 | 22P2197470 | |
| This is to notify you of a Pending Emission Modification Notification on approximately 5,700 vehicles. Affected VINs have been flagged in VMI as “PENDING” for EMC 8 on March 19, 2022. | |||
| Background | |||
| Issue | Mercedes-Benz USA, LLC (“MBUSA”) has entered into an agreement with the United States Department of Justice (DOJ), the Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and the California Attorney General’s Office (CA AG) regarding the emission control system in certain Mercedes-Benz diesel vehicles. As part of this agreement, MBUSA will offer field measures referred to as the Approved Emission Modification (“AEM”) for the affected vehicles. As a result, certain vehicles covered under this notification cannot be sold or caused to be sold, or leased or cause to be leased, or introduced into commerce, or exported from the United States to another country, until after the AEM described in this notification is performed. An authorized Mercedes-Benz dealer will install the AEM at a later date at no cost to the Owner/Lessee. | ||
| What We’re Doing | The AEM is currently not launched. Once launched, a launch notification will be sent to eligible owners and authorized Mercedes-Benz dealers. | ||
| Parts | Parts are not available at this time. | ||
| Vehicles Affected | |||
| Vehicle Model Year(s) | MY 2011-2012 | ||
| Vehicle Model | EMC 8 (E350BT) with 6 cylinder diesel engines OM642 | ||
| Vehicle Populations | |||
| Total Campaign Population | 5,700 | ||
| Next Steps/Notes | |||
| Customer Notification Timeline | Customer notifications will not be sent for this stop sale notification. When the Emission Modification launches, customers will be notified by mail. | ||
| AOMS/SOMS | This Pending Emission Modification Notification may initiate questions from customers and the media. Please ensure your Dealers have read and understand this notice. | ||
| Notes |
| ||
| While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-367-6372. | |||
Initial NCU Update – MY11-12 Various Diesel PC Models Stop Sale
Mercedes-Benz Reprogramming
All information in regard to Mercedes-Benz J2534 compliant software is available free of charge and found under the MB Workshop Resources tab on the home page of www.startekinfo.com
J2534 complaint software for Mercedes-Benz vehicles is available for purchase from Mercedes-Benz USA.
In order to use the J2534 complaint software for Mercedes-Benz vehicles, the purchaser must furnish their own:
- Windows based PC or laptop*
- J2534 compliant interface box*1*
*Must be purchased from a third party company and are not available from Mercedes-Benz USA LLC.
*1* suggested listing of J2534 interface boxes is located within the J2534 Pass-Thru User’s Manual which is posted for view without cost under the MB Workshop Resources tab on the home page of www.startekinfo.com
Vehicle Coverage
J2534 complaint software for Mercedes-Benz vehicles has coverage for all required functions associated to reprogramming, initialization, and fault clearing of emission control modules (engine and transmission) fitted to vehicles 2004 Model Year and newer. Additionally all access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.
J2534 complaint software for Mercedes-Benz vehicles is delivered via DVD media which is delivered monthly for the license term of one year upon purchase.
- All control unit software (reprogramming calibrations) is contained within J2534 DVD media.
Terms and conditions
J2534 complaint software for Mercedes-Benz vehicles is purchased in 1-year license increments. During that license term the user will receive an initial software package, license key, SCN/CVN Coding information/access as well as monthly updates via DVD media.
- Additional updates of software after the 1st year can be purchased at additional cost, however are not required for the system to continue functioning.
For pricing and additional information via the internet, please refer to the information at the beginning of this section.
SaleBestseller No. 1
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
- Advanced VCI Box, Industry-leading J2534 Pass-Thru Technology: This J2534 Pass-Thru Programmer is designed espically for technicians, independent shop owners, and DIY enthusiasts, enables fast, reliable computer-based programming. It supports all J2534 protocols—including the latest DoIP and CAN FD—ensuring full compatibility with both legacy and next-generation vehicles.
- High-Speed OEM-Level Diagnostics & Programming: Unlock true OEM functionality with comprehensive system diagnostics, guided troubleshooting, coding, adaptations, resets, and programming—all designed to slash repair time. This all-in-one tool eliminates the need for multiple OEM devices, boosting efficiency and cutting costs. Equipped with High-Speed USB, it delivers 10x more data per second than competing solutions
- Coverage for 17 Car Brands & Ultra Reliability: Works seamlessly for Chrysler, for Ford(Forscan), for GM, for Nissan, for Toyota, for Honda, for Subaru(SSM4), for Land Rover/Jaguar, for Volvo, for Wuling, for Volkswagen, for Mercedes-Benz, and for BMW. Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance
- User-Friendly RLink Platform & Expert Support: TOPDON’s proprietary driver management platform offers a clean interface and lifetime free updates. Access a rich library of real-world case studies to stay ahead of the curve. Backed by a support team with 10+ years of J2534 and automotive repair experience, we provide one-on-one assistance to resolve any technical issue.
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J2534 diagnostic tool features a 6.6ft USB 2.0 Cable and a 1.2 ft OBDII Extension Cable, allows to connection your computer easily outside the vehicle. The included handled carry case offers easy portability, storage, and hanging options—keeping your gear clean and ready to go, anywhere.
SaleBestseller No. 2
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
- J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 18 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen/Audi, Mercedes-Benz, and BMW. NOTE: Not compatible with Ford IDS diagnostic software
- All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease. *Not compatible with 24V vehicles
- Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON's dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
- Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
- Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously - CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don't provide extra OE software
SaleBestseller No. 3
TOPDON ONE Bidirectional Scan Tool, 10.1" OBD2 Scanner with J2534 Pass-Thru and ECU Coding, Over 50 Resets, Topology Mapping Car Diagnostic Tool for All Vehicles
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
SaleBestseller No. 4
TOPDON RLink J2534 OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, J2534-Pass-Thru for J2534/D-PDU/CAN-FD/DoIP, Supports 18+ Vehicle Brands, No OE Software Provided
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is engineered for professional technicians, delivering OEM diagnostic and reprogramming capabilities. It supports all J2534 protocols, CAN-FD, DoIP, D-PDU. Compatible with 17 vehicle brands—such as Chrysler, Ford, GM, KIA, Hyundai, Nissan, Toyota, Honda, Subaru, Mitsubishi, MAZDA, Land Rover/Jaguar, Volvo, Volkswagen/Audi, Mercedes-Benz, and BMW. RLink J2534 can help reduce the cost of purchasing equipment from different brands.
- [All-in-One OEM Reprogramming and Diagnostics] - When seamlessly integrated with OEM diagnostic software, this dongle enables you to perform a wide range of functions, including ECU programming and coding, DTC reading and clearing, active tests, component matching, adaptations, rewriting, guided troubleshooting, and more. This all-in-one tool eliminates the need for multiple OEM devices, significantly boosting work efficiency.
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink J2534 is renowned for its reliability, having successfully completed over 10,000 real-vehicle tests. The wealth of data and hands-on experience behind it ensures consistent performance and accurate results. You can trust this tool to deliver optimal performance.
- [One-Click Installation, Continuous Updates] - The exclusive TOPDON RLink platform streamlines installation with a one-click driver setup, allowing you to quickly access OEM software for diagnostic and reprogramming tasks. With lifetime free updates, your RLink J2534 stays current without any additional cost, ensuring reliable performance for the long term. *We don't provide extra OE software.
- [Works with Windows Compatibility and OEM Software Subscription] - The RLink J2534 supports three CAN channels - including CAN FD and CAN-CC, providing advantages in the process of rapid troubleshooting. Compatible with Windows 7, 8 and 10 (64-bit) and higher versions of the system. For full functionality, an active OEM software subscription is required for each supported vehicle brand. Please note that the dongle does not include OEM software, which must be purchased separately to access brand-specific diagnostic and reprogramming features.
Bestseller No. 5
Opus IVS CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
SaleBestseller No. 6
TOPDON RLink X3 OBD2 Adapter for GM/Ford/Chrysler, J2534 Pass-Thru Programmer, OBD USB FORScan Adapter, OEM Programming and Diagnostic Tool, Fit for 8+ OE Software, Supports J2534/CAN-FD, Auto Switch
- Upgraded Connector Design: The connector has been changed to prevent previous issues. If you bought the earlier model and encountered problems, message us for a hassle-free replacement—we've got you covered
- Made for GM, Ford & Chrysler Dealer-Level Access - Gain OEM-level diagnostics, ECU programming, coding, and bidirectional control with official OE software. Perform system resets and module customization across The Big 3 from one compact OBD2 to USB GM, Chrysler, and Forscan tool. *Does not support ECU diagnostics and programming for GM vehicles using DoIP protocol. Please verify compatibility before purchase
- Supports 8+ OE Software Platforms with One Tool - Work seamlessly across Forscan, FJDS, FDRS, Tech2Win, SPS 2, Techline, GDS2, and Witech 2.0. This J2534 pass-thru device lets you switch between platforms in seconds, streamlining workflow and reducing hardware costs. *No OE Software Provided, OE diagnostic software require separate subscriptions
- Reliable Forscan Adapter for Ford Diagnostics - The RLink X3 is a pro-grade Forscan OBD2 adapter, providing a stable connection for Ford, Lincoln, Mazda, and other Forscan software vehicles. Ideal for programming, module coding, and advanced vehicle configuration
- Broad Coverage for 2006 to 2025 GM, Ford & Chrysler Vehicles - Equipped with J2534 and CAN-FD protocols, this OBD2 connector supports model-year 2006 and newer vehicles. Handle the latest CAN-FD control systems with full compatibility across GM, Ford, and Chrysler platforms
Last update on 2026-06-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.