| “This site contains affiliate links for which OEMDTC may be compensated” |
Campaign No. 2021090006, September 2021
| TO: | ALL MERCEDES-BENZ CENTERS |
| SUBJECT: | Model CLA-Class (118 platform) Model Year 2021 Check Spare Wheel Well for Moisture |
Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2021 CLA-Class (118 platform) vehicles, the left rear section under the spare wheel well may not correspond to current specifications and may have developed a crack. This might allow water to enter into the spare wheel well. MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will check the spare wheel well for moisture on the affected vehicles and rework the respective area, if necessary.
Prior to performing this Campaign:
- VMI must always be checked before performing campaigns to verify that the campaign is required on a specific vehicle. Always check for any other open campaigns, and perform accordingly.
- Please review the entire Campaign bulletin and follow the repair procedure exactly as described.
Approximately 200 vehicles are affected.
Order No. P-SC-2021090006
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Record
Check Spare Wheel Well for Moisture
Model 118
Check/test procedure
- Open trunk lid
- Lift cover of spare wheel well.
- Check area of spare wheel well (A, Figure 1) for moisture/water.
-
- Moisture/water present in spare wheel well: Carry out work procedure.
- Moisture/water not present in spare wheel well: End measure.
Work procedure
- Remove rear bumper.
For basic data, see AR88.20-P-2200MFA.
- Remove left rear radar sensor mount (B, Figure 2).
- Drill off crack on left in rear-end center section (Figure 3), weld shut, blend paint, and apply a cavity protection agent.
- Assemble in reverse order.
Primary Parts Information
| Qty. | Part Name | Part Number |
| 1 | Cavity Sealing Wax | A 000 986 72 70 10 |
Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting.
Note: The following allowable labor operation should be used when submitting a warranty claim for this repair:
Warranty Information
With Check
| Damage Code | Operation Number | Description | Labor Time (hrs.) |
| 88 910 75 | 02-0589 | Check spare wheel well for leaks | 0.1 |
With Check and Repair
| Damage Code | Operation Number | Description | Labor Time (hrs.) |
| 88 910 75 | 02-0589 | Check spare wheel well for leaks | 0.1 |
| 02-0590 | Correct rear-end center section (after check)
Includes: Remove/install rear bumper; remove/install left rear radar sensor mount |
4.3 |
Note: Always check ASRA for the current OP-Code times. Labor times are subject to change and updates may not be reflected in this document.
P-SC-2021090006
Check Spare Wheel Well for Moisture
Model CLA-Class (118 platform)
Model Year 2021
https://www.startekinfo.com/service/download-document/outside/225774/
Loading...
Reload document 
Open in new tab
SaleBestseller No. 1
ACDelco GM Original Equipment 10-2013 Body Joint and Seam Filler Compound - 10.1 oz
- For professional use only – not for retail sale
- Fast curing and skins over quickly—can be painted 60 minutes after application
- Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints
- Flexible, non-staining, and non-sagging product that will not crack or shrink
Bestseller No. 2
![[2 Pack] Polyurethane Seam Sealer Automotive Compound Kit - Durable & Flexible Auto Body Filler - Seam & Joint Compound for Bare or Painted Surfaces - Automotive Seam Sealer White - RV Roof Sealant](https://m.media-amazon.com/images/I/413vOkWzIrL._SL160_.jpg)
[2 Pack] Polyurethane Seam Sealer Automotive Compound Kit - Durable & Flexible Auto Body Filler - Seam & Joint Compound for Bare or Painted Surfaces - Automotive Seam Sealer White - RV Roof Sealant
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- 2 Pack Value & Complete Kit - Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps - Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready - Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance - High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
Bestseller No. 3
Polyurethane Seam Sealer Automotive Compound Kit - Durable & Flexible Auto Body Filler - Seam & Joint Compound for Bare, Primed or Painted Surfaces - Automotive Seam Sealer White - RV Roof Sealant
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
SaleBestseller No. 4
3M Dynatron Auto Seam Sealer Caulk, 550, Grey Color, Permanently Elastic, Fast-Skinning, Non-Staining, Non-Sagging, 12 oz
- EASY APPLICATIONS: Brushable and paintable consistency
- HIGH ADHESION: Works on both bare metal and painted surfaces
- FAST SKINNING: Starts in about 10 to 15 minutes
- STAYS IN PLACE: Less likely to drip, sag or run out of gaps being sealed
- NON-STAINING: For all-purpose autobody joint and seam sealing
SaleBestseller No. 5
3M Urethane Seam Sealer, 08367, Black Color, High Solids, Permanently Flexible, 310 mL/10.5 fl oz Cartridge
- SINGLE COMPONENT FORMULA: Adheres well to bare metal, primed metal and painted surfaces
- MOISTURE CURING PROPERTY: Provides excellent performance in high heat and humidity environments
- NON-SHRINKING, NON-CRACKING: Remains flexible and offers superior results to solvent-based sealers
- QUICK PAINTABILITY: Allows painting after 30-45 minutes
- THICK CONSISTENCY: Fills large voids and can be smoothed to a featheredge or brushed
Bestseller No. 6
Barrier Bond Brushable Seam Sealer - Quart Can with 30.4 Fluid Ounces - Automotive Brush on Body Seams, Joints, Floors, Trunks - Autobody Repair, Fast-Drying, Paintable
- Brushable Seam Sealer is fast drying and designed exclusively for automotive uses.
- This product remains flexible and will not crack, harden, sink or sag.
- Brushable Seam Sealer is easily applied with a brush and holds a perfect brush mark to match that O.E.M. seam.
- It provides excellent adhesion, seals cracks, crevices, body seams and is ideal for use on all lap and flange seams and joints.
- Brushable Seam Sealer is paintable in 30 to 60 minutes and comes in a light gray color.
Bestseller No. 7
2 Pack Polyurethane Seam Sealer Automotive,High Flexible Auto Body Filler Sealing Automotive and RV Seams and Joints for Bare or Painted Surfaces, Automotive Seam Sealer,10.5 fl oz,White
- Vehicle Body Repair: Automotive Seam Sealer for all-purpose auto body gap filling,joint and seam sealing.Protect your vehicle from rust and corrosion with these automotive seam sealers.Ideal for car ,truck, boat, RVs.
- High Adhesive & Durable - designed this urethane sealer for a range of materials, including bare metal or painted surfaces.
- Don't Shrink and Crack - low odor single component formula auto seam sealer provides flexible,non-staining, and non-sagging.
- Easy to Use - Fast cure time.You can paint over the undercoating . For best results, allow 24 hours and scuff before painting.
- Water and Corrosion Proof - Use interior or exterior to prevent weather from eroding your car.Service Temperature -40 to 170 °F (-40 to 77 °C).High heat performance.
Bestseller No. 8
Eastwood Flexible Insulated Waterproof Brush on Seam Sealer Floor Trunk Fender 30.4 oz
- Seals Cracks, Crevices And Body Seams, Plus Waterproofs And Insulates
- Flexible - Will Not Shrink, Harden Or Crack
- Seals Cracks, Crevices And Body Seams
- For Firewalls, Floor Pans, Trunk Seams, Fender Extensions, Taillight Openings
- Paintable In 30 Minutes
Bestseller No. 9
Akfix P645 Seam Sealer Automotive Gray (1x10.1 Oz.) - Urethane Autobody Seam Sealer Adhesive for Metal Joints, RV Roof Sealant, Sandable, Paintable, Fast Curing and Durable Bonding | Gray, 1 Pack
- 𝗦𝗲𝗮𝗺𝗹𝗲𝘀𝘀 𝗔𝗱𝗵𝗲𝘀𝗶𝗼𝗻 𝗳𝗼𝗿 𝗣𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹𝘀: Achieve unmatched durability with Akfix P645, the perfect automotive seam sealer for experts. It provides a professional finish thanks to over-paintable and sandable features after full curing.
- 𝗘𝗻𝗱𝘂𝗿𝗶𝗻𝗴 𝗙𝗹𝗲𝘅𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Trust in the permanently flexible bond of Akfix P645, designed for the dynamic demands of automotive restoration and construction.
- 𝗘𝗳𝗳𝗼𝗿𝘁𝗹𝗲𝘀𝘀 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻: With its non-sag and non-sticky formula, Akfix P645 ensures a clean application every time, without attracting dirt.
- 𝗨𝗻𝗿𝗶𝘃𝗮𝗹𝗲𝗱 𝗗𝘂𝗿𝗮𝗯𝗶𝗹𝗶𝘁𝘆: Especially designed for body construction of cars, containers, caravans and projects that require durability in the automotive and construction industry. Formulated to resist the effects of aging to better perform.
- 𝗥𝗲𝗮𝗱𝘆 𝗧𝗼 𝗨𝘀𝗲: Akfix P645 sealant is packaged in a user-friendly cartridge, compatible with electric, pneumatic, or manual application guns, facilitating precise and effortless adhesive paste placement.
Bestseller No. 10
Barrier Bond Black Polyurethane Seam Sealer Adhesive Compound - 10.5 fl. Ounce Cartridge Tube, Automotive Seam Sealer Black - RV Roof Sealant
- Polyurethane Seam Sealer/Adhesive Compound is a one component, moisture-cure sealant designed exclusively for automotive uses. Automotive Seam Sealer Black - RV Roof Sealant
- This product cures under the effect of atmospheric humidity to form a permanently flexible and resistant joint.
- This product is a high quality elastomeric sealant formulated to combine high flexibility with high ultimate strength, permanent bonds and long service life.
- This product provides excellent adhesion to a wide variety of substrates and comes in an easy to use, non-sag consistency suitable for easy application with a standard caulking gun in both horizontal and vertical automotive joints.
- Easy application, ready to use, no mixing required
Last update on 2024-04-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.