WORK DESCRIPTION FOR FIELD MEASURE
Code: 20P4790103
Version: 2.0
Figure 1
Work procedure
- Remove front section of lower engine compartment lining.
For basic data, see AR61.30-P-1001ME.
- Release both click clamps (red circle, Figure 1) at the fuel hose.
- Replace fuel hose (A, Figure 1).
Collect escaping fuel in a suitable vessel and seal fuel lines if necessary.
- Assemble in reverse order.
Parts
| Quantity | Designation | Part no. |
| 1 | Fuel hose | A 167 470 80 03 |
* The part for the chassis number must be determined via the EPC
Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealants, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting.
Operation text and flat rate
| Operation | Operation text no. | Flat rate | Accounting no./ damage code |
| 02-1788 | Replace fuel hose | 0.9 hours | 47 901 03 |
Global Service & Parts
Replace Fuel Hose
Model GLE-Class (167 platform)
Model Year 2020
Bestseller No. 1
CRC GDI IVD Intake Valve & Turbo Cleaner
- Proven to clean intake valves on GDI engines and turbo systems
- Easily installed through the air intake system
- Highest concentration PEA (Polyether Amine) detergency available
- Proven to remove up to 46% of GDI Intake Valve deposits in 1 hour
- 150X more concentrated than fuel additives
Bestseller No. 2
CRC GDI IVD Intake Valve & Turbo Cleaner Bundle 05110 11 Oz Mass Air Flow Sensor Cleaner
- Proven to clean intake valves on GDI engines and turbo systems with advanced Cozol technology
- Increases horsepower and improves air/fuel ratio and MPG by cleaning mass air flow sensors
- Easily installed CRC cleaner through the air intake system to remove deposits
- CRC GDI cleaner dissolves baked-on carbon deposits for smoother idle
- Mass air flow sensor cleaner dries in seconds and is plastic safe
Bestseller No. 3
Berryman Products 2611 Intake Valve and Combustion Chamber Cleaner, 16-Ounce Aerosol
- Formulated for Use In All Fuel-Injected Gasoline Engines, Including GDI
- Contains Polyetheramine (“PEA”) to Dissolve Carbon Buildup in Combustion Chambers
- Cleans ALL Types of Intake Valves, Including Those Found in PFI, TBI, and GDI Engines
- Safe On Catalytic Converters and Oxygen Sensors
- Not For Use In Diesel Engines
Bestseller No. 4
Berryman 2611 Intake Valve & Combustion Chamber Cleaner – Engine Cleaner Spray with SMA Shop Towel | PEA Induction Carbon Cleaner for GDI, PFI & TBI Fuel Injected Gas Engines
- BERRYMAN 2611 CLEANER – Receive one (1), 16 oz can of Berryman Intake Valve & Combustion Chamber Cleaner with Application Hose Kit (MPN 2611). Professional engine carbon cleaner spray formulated to remove carbon buildup from intake valves and combustion chambers in gasoline engines.
- DIRECT INDUCTION CLEANING TREATMENT – This intake valve cleaner spray is applied through the intake system while the engine is running, allowing the cleaner to reach intake valves and combustion chambers directly. Designed for use in fuel injected gasoline engines including PFI, TBI and modern GDI engines.
- POWERFUL PEA CARBON CLEANING – Contains polyetheramine (PEA), a professional engine cleaning agent used to break down stubborn carbon deposits. Helps remove buildup from intake valves, combustion chambers and internal engine components to restore airflow and combustion efficiency.
- RESTORE ENGINE PERFORMANCE & DRIVABILITY – Dissolves heavy carbon buildup that can reduce efficiency and cause rough idle, hesitation and reduced power. Helps restore original octane requirements and improve throttle response, acceleration and overall engine performance. Safe for catalytic converters and oxygen sensors.
- UNIVERSAL APPLICATION ACCESSORIES – Includes application hoses and adapters designed for induction cleaning treatments across a wide range of gasoline engines. Bundle also includes one (1), SMA ProQor reusable shop towel for wiping spills and keeping your workspace clean during engine maintenance.
Bestseller No. 5
CRC 05319 GDI IVD Intake Valve and Turbo Cleaner – 11 oz, Pack of 12
- Removes Carbon Buildup Fast: Breaks down stubborn, baked‑on carbon deposits on intake valves and turbo components, restoring airflow and improving engine performance.
- Boosts Power & Efficiency: Regular use increases power and torque, improves MPG, and reduces rough idle, hesitation, and hard starts.
- Proven High‑Strength Formula: Delivers concentrated cleaning agents directly to intake valves—up to 150× stronger than premium fuel additives—and removes up to 46% of deposits within the first hour.
- No Engine Teardown Required: Safe for GDI and PFI engines; simply spray through the air intake system for professional‑grade cleaning without disassembly.
- Reduces Emissions & Improves Drivability: Helps restore proper combustion, reduce harmful emissions, and smooth out idle and acceleration for a cleaner‑running engine.
This product presentation was made with AAWP plugin.