ECU and TCU Software Update – 2020 Mercedes-Benz Sprinter

2020 Mercedes-Benz Sprinter

Campaign No. 2021070026, July, 2022 California Only: 210726 MBAG has determined that on certain Sprinter vehicles (platform 907), the Engine Control Unit (ECU) software and Transmission Control Unit (TCU) software does not correspond to current series production specifications. An authorized Mercedes-Benz Sprinter dealer will update the Engine Control Unit (ECU) software and Transmission Control Unit … Read more

OBD Functionality of ESP Control Unit – 2021 Mercedes-Benz GLE-Class

2021 Mercedes-Benz GLE-Class

This is to notify you of the Service Campaign Launch to perform SCN coding in the electronic stability program control unit in 5,272 Model Year (“MY”) 2021 GLE-Class (167 platform) vehicles.  The vehicles will be visible and flagged in VMI as “OPEN” on July 29, 2022.   Issue Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz, … Read more

Update Driving Assistance System Control Unit Software – 2021 Mercedes-Benz S-Class

2021 Mercedes-Benz S-Class

This is to notify you of the Service Campaign Launch to update the driving assistance control unit software in 9,117 Model Year (“MY”) 2021 S-Class (223 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on July 29, 2022.   Issue Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz, has determined that … Read more

Replace Tire Pressure Label on Fuel Filler Flap and B-Pillar – 2020-2021 Mercedes-Benz GLE-Class & GLS-Class

2021 Mercedes-Benz GLS-Class

This is to notify you of the Service Campaign Launch to check the vehicle placard on the B-pillar, and replace if necessary, on 978 Model Year (“MY”) 2020-2021 GLE-Class and GLS-Class (167 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on July 29, 2022.   Issue Mercedes-Benz AG (“MBAG”), the … Read more

Correct Seam Seal In Area Of Left Rear Lamp Unit – 2022 Mercedes-Benz EQS-Class

2022 Mercedes-Benz EQS-Class

WORK DESCRIPTION FOR FIELD MEASURE   Correct seam seal in area of left rear lamp unit Model 297   Work procedure For basic data, see AR88.20-P-2200EQS.     3.1. Clean affected area. 3.2. Apply activator to the affected area (Figure 2). Observe the flash-off time of the activator! 3.3. Affix additional transparent seam seal in … Read more