“This site contains affiliate links for which OEMDTC may be compensated” |
Mercedes-Benz E-Class (C207)
Manufacturer
Daimler AG
Production
May 2009 – 2017
Model years
2010-2017
Chassis Family 207 E-Class Coupe
Model | Chassis | Engine |
E350 Coupe | 207.356 | 272.961 |
E350 CGI | 207.359 | 276.957 |
E550 Coupe | 207.372 | 273.966 |
E550 Coupe | 207.373 | 278.922 |
E350 Coupe 4MATIC BlueTec | 207.388 | 276.957 |
E350 Cabriolet | 207.456 | 272.988 |
E350 CGI Cabriolet | 207.459 | 276.957 |
E550 Cabriolet | 207.472 | 273.966 |
E550 Cabriolet | 207.473 | 278.922 |
Mercedes-Benz E-Class (W212)
Manufacturer
Production
2009–2016
Model years
2010–2016
Chassis Family 212 E-Class
Model | Chassis | Engine |
E350 (BLUETEC) | 212.024 | 624.850 |
E350 | 212.056 | 272.980 |
E350 | 212.056 | 272.964 |
E350 | 212.059 | 276.952 |
E550 | 212.072 | 273.971 |
E63 AMG | 212.074 | 157.981 |
E63 AMG | 212.077 | 156.985 |
E350 4MATIC | 212.087 | 272.977 |
E350 4MATIC | 212.088 | 276.952 |
E550 4MATIC | 212.090 | 273.970 |
E550 4MATIC | 212.091 | 278.922 |
E400 Hybrid![]() | 212.095 | 276.952 |
E63 AMG Wagon | 212.274 | 157.981 |
E63 AMG Wagon | 212.277 | 156.985 |
E350 Wagon 4MATIC | 212.287 | 272.977 |
E350 Wagon 4MATIC | 212.288 | 276.952 |
Mercedes-Benz CLS-Class (W218)
Manufacturer
Daimler AG
Production
2010–2018
Chassis Family 218 CLS-Class
AP00.20-P-0042EW | Reset service indicator | 10.9.12 |
MODEL 207, 212, 218
Illustration shows model 212.002
A1p13 Multifunction display S110s1 Scroll forward/back button S110s3 System selection button
S110s4 “Back” and voice control system OFF button S110s6 OK button
S111s3 Accept/terminate phone call button
Reset | |||
1 | Close engine hood | MODEL 207, 212, 218
MODEL 207, 212 |
AR88.40-P-1000EW |
2 | Close doors and trunk lid or liftgate | ||
3 | Turn transmitter key in electronic ignition lock control unit to position “1” | The standard display (kilometer counter) must appear in the multifunction display (A1p13), if necessary press scroll forwards and back button (S110s1) repeatedly. | |
4 | Press the system selection button (S110s3) repeatedly until the menu item “trip” with highlighter is stored in the multifunction display (A1p13) | “Trip” remains selected for approx. 5 s. Operation step 5 must be carried out within this time. | |
5 | First press and hold down Accept and end phone call button (S111s3) and then within 1 s also press and hold down OK button (S110s6) for approx. 5 seconds | The workshop menu with the “Vehicle data”, “Dynamometer test” and “ASSYST PLUS” tabs appears in the multifunction display (A1p13). | |
6 | Press scroll forward/back button (S110s1) repeatedly until “ASSYST PLUS” is highlighted and confirm selection by pressing OK button (S110s6) | The indexes “Service data” and “Full service” (A1p13) appear in the multifunction display. | |
7 | Press scroll forward/back button (S110s1) to highlight “Full service” and then confirm selection by pressing OK button (S110s6) | The current service items appear in the multifunction display (A1p13). | |
8 | Press scroll forward/back button (S110s1) repeatedly until “Confirm serv.” is highlighted in the multifunction display (A1p13) and confirm selection by pressing OK button (S110s6) | “Service carried out?” or the oil selection appears in the multifunction display (A1p13). | |
9 | Select specification of used engine oil using scroll forward button of the scroll forward/back button (S110s1) and confirm selection by pressing OK button (S110s6) | In order to achieve the maximum kilometer interval, engine oil for gasoline engines must be used and confirmed as per Specifications for Operating Fluids sheet 229.5 and engine oil for diesel engines must be used and confirmed as per Specifications for Operating Fluids sheet 229.51. | |
10 | Press scroll forward/back button (S110s1) until “Yes” is highlighted and confirm selection by pressing OK button (S110s6) | “No take-back possible” appears in the multifunction display (A1p13). | |
11 | Press scroll forward/back button (S110s1) until “Confirmation” is highlighted and confirm selection by pressing OK button (S110s6) | “Full service carried out” appears in the multifunction display (A1p13). | |
12 | Press the OK button (S110s6) and press the “Back” and VCS OFF (S110s4) button repeatedly until the multifunction display (A1p13) shows the standard display (kilometer counter) | ||
13 | Turn transmitter key in electronic ignition lock control unit to position “0” |
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Our most advanced full synthetic 0W-40 engine oil, designed for unbeatable engine protection*
- Pennzoil Ultra Platinum comes with a 20-year, 750,000-mile warranty** to protect your engine and give you peace of mind to drive every mile as hard as you can
- Made with natural gas
- Outstanding performance in extreme temperatures
- Designed for high-performance engines, it helps protect engines from loss of power
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN, ACEA A3/B3, A3/B4, MB 229.5, MB 229.3, MB 226.5, VW 502.00/505.00, VW 505.01, BMW LL-01, Porsche A40, Renault RN0700 & RN0710, Chrysler
A0921, Chrysler
MS-12633, Chrysler
MS-10725
- ADVANCED MOTOR OIL: Mobil 1 Supercar 0W-40 is an advanced full synthetic, high performance motor oil specifically designed for street and track use in high performance North American sports cars.
- FORMULATED PERFORMANCE: Engineered with a proprietary blend of leading edge components formulated to provide exceptional cleaning power, wear protection, and deliver outstanding overall performance.
- FOR MORE: Mobil 1 Supercar 0W-40 advanced full synthetic motor oil features enhanced frictional properties that help enable improved fuel economy, achieve higher horsepower and reduce engine wear.
- LONGER ENGINE LIFE: Active cleaning agents help enable lower operating temperatures and a resulting longer engine life, while thermal and oxidation stability help to reduce oil aging.
- HIGHLY RECOMMENDED: Mobil 1 Supercar 0W-40 is recommended for GM dexos(R) oil applications, including high performance naturally aspirated, turbo-charged, and super-charged gasoline engines. *
- Full synthetic 0W-40 motor oil that is made with natural gas and designed to maximize engine protection
- Formulated for modern light-duty diesel and high-performance engines in European vehicles, including Mercedes-Benz
, Renault, VW, and Porsche vehicles
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed*
- Delivers faster low-temperature oil flow and protection in extreme heat
- Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
- 4-stroke off-road SXS/UTV engines
- For use in original equipment that requires API SM, JASO MA2
- All temperature/all weather
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.