“This site contains affiliate links for which OEMDTC may be compensated” |
Mercedes-Benz GL-Class (X166)
Manufacturer
Also called
Production
June 2012–April 2019
Model years
2013–2019
Chassis Family 166 GL-Class
Model | Chassis | Engine |
ML350 4MATIC | 166.057 | 276.955 |
ML350 4MATIC Bluetec | 166.024 | 642.826 |
ML550 4MATIC | 166.073 | 278.928 |
ML63 AMG | 166.074 | 157.982 |
GL350 4MATIC | 166.824 | 642.826 |
GL450 4MATIC | 166.872 | 278.928 |
GL550 4MATIC | 166.873 | 278.928 |
GL63 AMG | 166.874 | 157.980 |
Mercedes-Benz SLK-Class (R172)
Manufacturer
Daimler AG
Also called
Mercedes-Benz SLC-class (facelift)
Production
2011–present
Chassis Family 172 SLK-Class
Model | Chassis | Engine |
SLK250 CGI | 172.447 | 271.861 |
SLK350 CGI | 172.457 | 276.956 |
SLK55 AMG | 172.475 | 152.980 |
Mercedes-Benz A-Class
Manufacturer
Daimler-Benz (1997–1998)
DaimlerChrysler (1998–2007)
Daimler AG (2007–present)
Production
1997–present
Third generation (W176; 2013–2018)
Production
2012–2018
Model years
2013–2018
A-Class Sedan model 176 as of 2013
Mercedes-Benz CL-Class
Manufacturer
Daimler-Benz (1992-1998)
DaimlerChrysler (1998-2007)
Daimler AG (2007-2014)
Production
1992–2013 (EU)
1992–2014 (US)
Chassis Family 231 SL-Class
Model | Chassis | Engine |
<SL550 | <231.473 | <278.927 |
<231.474 | <157.980 | |
<231.479 | <279.981 |
Mercedes-Benz B-Class
Manufacturer
DaimlerChrysler (2006–2007)
Daimler AG (2007–present)
Production
2005–present
Model years
2006–present
B-Class NGD Tourer model 242 as of 2013
Second generation (W246, 2011–2018)
Production
2011–2018
Model years
2012–2018
B-Class Tourer model 246 as of 2011
AP00.20-P-0042W | Reset service indicator | 6.2.14 |
MODEL 166, 172, 176, 231, 242, 246
Shown on model 172.457
A1p13 Multifunction display S110s1 Scroll forward/back button S110s3 System selection button
S110s4 “Back” and voice control system OFF button S110s6 OK button
S111s3 Accept/terminate phone call button
Reset service indicator | ||
1 | Close engine hood, doors and trunk lid | |
2 | Turn transmitter key in electronic ignition lock control unit to position “1” | The standard display (total distance) must appear in the multifunction display (A1p13), if necessary repeatedly press the scroll forward/back button (S110s1). |
3 | Repeatedly press system selection button (S110s3) until the “Trip” menu item is highlighted in the multifunction display (A1p13). | “Trip” remains selected for approx. 5 s. Operation step 4 must be carried out within this time. |
4 | First press and hold the Accept/Terminate phone call button (S111s3), then – within 1 s, press the OK(S110s6) button. | Press and hold Accept/Terminate phone call button (S111s3) and OK button (S110s6) for approx. 5 s: The multifunction display (A1p13) then shows the Workshop menu with the “Vehicle data”, “Dynamometer test”, “Brake pad replacement” and “ASSYST
PLUS” tabs. |
5 | Press scroll forwards and backwards button (S110s1) repeatedly, until “ASSYST PLUS” is highlighted and confirm selection with the OK (S110s6) button | The multifunction display (A1p13) shows the “Service Data” and “Full Service” tabs. |
6 | Press scroll forwards and backwards button (S110s1) until “Full Service” is highlighted and confirm selection with OK (S110s6) button | The multifunction display (A1p13) shows the current service items, e.g. “Service 1” and “Service 3”, as well as “Confirm Service”. |
7 | Press scroll forwards and backwards button (S110s1) repeatedly until “Confirm service” is highlighted and confirm selection with the (S110s6) button | The multifunction display (A1p13) shows the engine oil selection, e.g. “Oil Quality 229.3” or “Oil Quality 229.5”. |
8 | Select specification for engine oil used with scroll forwards and backwards button (S110s1) and confirm selection with the OK(S110s6) button | The multifunction display (A1p13) then shows the selected oil quality and “Service performed?”.
Engine 270, 271, 276 To achieve the maximum service interval, engine oil which complies with the Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed! |
9 | Press scroll forwards and backwards button (S110s1) repeatedly until “Yes” is highlighted and confirm selection with the OK (S110s6) button | The multifunction display (A1p13) then shows “Take-back not possible”, “Cancel” and “Confirmation”. |
10 | Press scroll forwards and backwards button (S110s1) repeatedly until “Confirmation” is highlighted and confirm selection with the OK (S110s6) button | The multifunction display (A1p13) shows “Full Service Performed”. |
11 | Press and hold OK button (S110s6) and repeatedly press “Back” and VCS Off (S110s4) button until the multifunction display (A1p13) shows the standard display (total distance) | |
12 | Turn transmitter key in electronic ignition lock control unit to position “0” |
https://www.startekinfo.com/StarTek/outside/11810/?requestedDocId=11810
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- The information below is per-pack only
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Full synthetic 0W-40 engine oil with PurePlus Technology that is race-trusted for unbeatable engine protection*
- Pennzoil Ultra Platinum helps extend engine life and protects for up to 20 years or 750,000 miles, whichever comes first** (see warranty information in Product Description)
- Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler SRT8 HEMI engine, and the SRT Viper (Chrysler, HEMI, SRT, and SRT8 are registered trademarks of Chrysler Group LLC)
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN, ACEA A3/B3, A3/B4, & C3, MB 229.5, 229.3, & 226.5, VW 50200/50500 & 50501, BMW LL-01, Porsche A40, Renault RN0700 & RN0710, and Chrysler MS-12633/ MS-10728
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States
- Package Dimensions: 4.572 H x 22.606 L x 10.921 W (centimeters)
- Country of Origin : United States
- Package Weight: 1.899 pounds
- Fit type: Vehicle Specific
- OEM Arctic Cat Part Number: 2436-857, Replaces: 2436-689
- Advanced multigrade 4-cycle all weather formula. Superior rust and corrosion protection even during periods of nonuse.
- Offers maximum engine performance along with unique shear-stable additve formula that protects against engine wear, carbon buildup and sludge formation.
- ACX is wet-clutch certified for use in Arctic Cat Off Road wet-clutch engines.
- Automotive engine oils DO NOT meet the requirements for use in Arctic Cat Off Road ATVs equipped with a wet clutch.
Last update on 2024-06-05 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.