“This site contains affiliate links for which OEMDTC may be compensated” |
Mercedes-Benz SLS AMG
Manufacturer
Daimler AG (Mercedes-Benz)
Production
January 2010–2014
Model years
2010–2015
Chassis Family 197 SLS-Class
Model | Chassis | Engine |
SLS AMG Coupe | 197.377 | 159.980 |
SLS AMG GT Coupe | 197.378 | 159.980 |
SLS AMG Roadster | 197.477 | 159.980 |
SLS AMG GT Roadster | 197.478 | 159.980 |
AP00.20-P-0042RQ | Reset service indicator | 25.4.13 |
MODEL 197.3/4
A1p13 Multifunction display
S110s1 Scroll forward/back button (scroll forward button) S110s3 System selection button
S110s4 “Back” and voice control system OFF button (“Back” button)
S110s6 OK button
S111s3 Accept/terminate phone call button (Accept phone call button)
Adjust | ||
1 | Close engine hood, trunk lid and doors | |
2 | Turn key in ignition switch to position “1” | The standard display (kilometer counter) must appear in the multifunction display (A1p13), if necessary press the scroll forward
button (S110s1) repeatedly. |
3 | Press the system selection button (S110s3) repeatedly until the menu item “trip” is highlighted in the multifunction display (A1p13) | “Trip” remains selected for approx. 5 s. Operation step 3 must be carried out within
this time. |
4 | First press and hold down Accept phone call button (S111s3) and then within 1 s also press and hold down OK button (S110s6) | Keep both buttons (S111s3, S110s6) pressed for approx. 5 s: The workshop menu with the tabs “Vehicle data”, “Dynamometer test” and “ASSYST PLUS” appears in the
multifunction display (A1p13). |
5 | Press the scroll forward button (S110s1) repeatedly until “ASSYST PLUS” is highlighted and confirm selection with the OK
button (S110s6) | The multifunction display (A1p13) then shows the “Service data”, “Full Service” and “Oil measurement” tabs. |
6 | Press scroll forward button (S110s1) in order to highlight “Full Service” and confirm the selection with the OK button ( S110s6) | The current service items and “Confirm service” tabs are shown on the multifunction display (A1p13). |
7 | Press the scroll forward button (S110s1) repeatedly until “Confirm service” is highlighted and confirm selection with the OK button (S110s6) | The multifunction display (A1p13) then shows “Oil quality 229.5” and
“Serv. conducted?”. |
8 | Press scroll forwards button (S110s1) until “Yes” is highlighted and confirm selection with OK button (S110s6) | “Take-back not possible” appears in the multifunction display (A1p13). |
9 | Press scroll forwards button (S110s1) until
“Confirmation” is highlighted and confirm selection with OK button (S110s6) | “Full service conducted” appears in the multifunction display (A1p13). |
10 | Press OK button (S110s6) and press “Back” button (S110s4) repeatedly until the multifunction display (A1p13) shows the
standard display (kilometer counter) | |
11 | Turn key in ignition lock to position “0” |
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Our most advanced full synthetic 0W-40 engine oil, designed for unbeatable engine protection*
- Pennzoil Ultra Platinum comes with a 20-year, 750,000-mile warranty** to protect your engine and give you peace of mind to drive every mile as hard as you can
- Made with natural gas
- Outstanding performance in extreme temperatures
- Designed for high-performance engines, it helps protect engines from loss of power
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN, ACEA A3/B3, A3/B4, MB 229.5, MB 229.3, MB 226.5, VW 502.00/505.00, VW 505.01, BMW LL-01, Porsche A40, Renault RN0700 & RN0710, Chrysler
A0921, Chrysler
MS-12633, Chrysler
MS-10725
- ADVANCED MOTOR OIL: Mobil 1 Supercar 0W-40 is an advanced full synthetic, high performance motor oil specifically designed for street and track use in high performance North American sports cars.
- FORMULATED PERFORMANCE: Engineered with a proprietary blend of leading edge components formulated to provide exceptional cleaning power, wear protection, and deliver outstanding overall performance.
- FOR MORE: Mobil 1 Supercar 0W-40 advanced full synthetic motor oil features enhanced frictional properties that help enable improved fuel economy, achieve higher horsepower and reduce engine wear.
- LONGER ENGINE LIFE: Active cleaning agents help enable lower operating temperatures and a resulting longer engine life, while thermal and oxidation stability help to reduce oil aging.
- HIGHLY RECOMMENDED: Mobil 1 Supercar 0W-40 is recommended for GM dexos(R) oil applications, including high performance naturally aspirated, turbo-charged, and super-charged gasoline engines. *
- Full synthetic 0W-40 motor oil that is made with natural gas and designed to maximize engine protection
- Formulated for modern light-duty diesel and high-performance engines in European vehicles, including Mercedes-Benz
, Renault, VW, and Porsche vehicles
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed*
- Delivers faster low-temperature oil flow and protection in extreme heat
- Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
- 4-stroke off-road SXS/UTV engines
- For use in original equipment that requires API SM, JASO MA2
- All temperature/all weather
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.