February 22, 2019 NHTSA CAMPAIGN NUMBER: 19V121000
Rear Fog Lights May Not Turn On
The lack of functioning rear fog lamps prevents the enhanced visibility of the vehicle to other drivers on the road, increasing the risk of crash.
NHTSA Campaign Number: 19V121
Manufacturer Daimler Vans USA, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1,197
Summary
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019 Mercedes-Benz
Sprinter VS30 vehicles equipped with LED rear fog lights. The lights may not illuminate, despite the rear fog light switch being turned on.
Remedy
DVUSA will notify owners, and dealers will update the software settings of the control unit body controller, free of charge. The recall began April 18, 2019. Owners may contact DVUSA customer service at 1-877-762-8267.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Vans Recalls
| TO: Mercedes-Benz | FROM: Anthony Washington, Department Manager, Regulatory Mgmt & Campaigns |
| RE: Recall Campaign Launch Notification LED Rear Fog Lamps Model Years 2019 Mercedes-Benz (907) Sprinters | DATE: March 25, 2019 |
IMPORTANT CAMPAIGN INFORMATION
RECALL CAMPAIGN LAUNCH NOTIFICATION
March 25, 2019
| Campaign | Campaign Description : | LED Rear Fog Lamps | ||
| 2019030013 | VS3NEBELED | |||
| This is to notify you of the Recall Campaign concerning the signal acquisition and actuation module on approximately 1,202 MY19 Sprinter (907) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected vehicles will be flagged as “Open” in VMI on March 25, 2019. | ||||
| Background | ||||
| Issue | Daimler AG (“DAG”), the manufacturer of Mercedes-Benz | |||
| What We’re Doing | An authorized dealer will encode the signal acquisition and actuation module on the affected vehicles. | |||
| Parts | No replacement parts are required. | |||
| Vehicles Affected | ||||
| Vehicle Model | Model Year 2019 | |||
| Vehicle Model | Platform 907 (Sprinter) | |||
| Vehicle Populations | ||||
| Total Recall Population | Approximately 1,202 | |||
| Dealer Inventory | 131 | |||
| Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new MY19 Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.
Loaner and demonstrator vehicles should not be driven, and must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new MY19 Sprinter vehicles covered by this notification until the vehicle has been repaired. | ||||
|
Next Steps/Notes | ||||
| Customer Notification Timeline | Owner notification letters will be mailed in late April. | |||
| VAOMs/RSMs | This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | |||
| Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred DVUSA dealer. | |||
| While we regret any inconvenience this may cause, DVUSA is determined to maintain a high level of vehicle quality and customer satisfaction. | ||||
Campaign No. 2019030013, March 2019
| TO: | ALL MERCEDES-BENZ |
| SUBJECT: | Model 907 (Sprinter), Model Years 2019 LED Rear Fog Lamps |
Daimler AG (“DAG”), the manufacturer of Mercedes-Benz
vans, has determined that on
certain Mercedes-Benz
Sprinter vehicles (platform 907, open model designation) for the
NAFTA market, the rear fog lamp in the LED rear lamps may not be activated at all or
activated with a delay even though the vehicle’s rear fog light switch is in the “on” position
and its activation is indicated to the driver in the instrument cluster. In this case, the
customer’s expectation regarding a safely functioning rear fog lamp might would not be met
which could increase the risk of an accident. An authorized dealer will encode the signal
acquisition and actuation module on the affected vehicles.
Prior to performing this Recall Campaign:
- Please check VMI to determine if the vehicle is involved in the Campaign and if it has been
previously repaired. - Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.
Please note that Recall Campaigns do not expire and may also be performed on a vehicle with
a vehicle status indicator.
Approximately 1,202 vehicles are involved.
Warranty Information
Operation items and work units
| Operation number | Operation text | Labor Time (hrs.) | Damage Code |
| 02 2443 | Operations: Connect/disconnect vehicle diagnosis system | 0.1 | 82 92 251 7 |
| 02 2445 | Operations: Connect/disconnect charger (vehicle diagnosis system connected) | 0.1 | 82 922 51 7 |
| 02 2444 | Operations: Perform SCN coding in control unit (vehicle diagnosis system connected) | 0.1 | 82 922 51 7 |
Procedure
Check
| 1 | Check, whether the vehicle is affected by the measure | For authorized Mercedes‑Benz service partners, only the entry in the „Extended VEGA Application“(EVA) system, in the “Current” tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary. |
| SCN coding | ||
| 2 | Connect diagnostic system. | It is absolutely essential to precisely follow the operation steps as described in the vehicle diagnosis system. |
| 3 | Connect charging equipment. Maintaining onboard electrical system voltage when performing test and diagnosis work on vehicle | During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle’s on-board electrical system. Otherwise any undervoltage that occurs may damage the control units.
Follow the operating instructions for the charger. Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the onboard electrical system battery. |
| 4 | Perform SCN coding in the signal acquisition and actuation module. | See process description in diagnostic system “INFO”. |
| 5 | Disconnect diagnostic system. | |
| 6 | Remove charger from vehicle. | |
IMPORTANT SAFETY RECALL
This notice applies to your vehicle,
VIN:
LED Rear Fog Lamps
NHTSA Recall #19V121
April, 2019
- A remedy is available for your vehicle.
- Schedule an appointment with your authorized Mercedes-Benz
dealer as soon as possible. - This repair will be provided free of charge.
Dear Mercedes-Benz
Sprinter Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler AG (DAG), the manufacturer of Mercedes-Benz
Sprinter vehicles, has decided that a defect that relates to motor vehicle safety exists in certain Model Year 2019 Sprinter vehicles. Our records indicate that your vehicle is included in the affected population of vehicles.
| What is the CONCERN? | DAG determined that on certain Mercedes-Benz |
| What will your DEALER DO? | An authorized Mercedes-Benz |
| What should YOU DO? | For additional information and to schedule an appointment, please contact your preferred authorized MercedesBenz dealer at your earliest convenience. To locate authorized dealers see www.mbvans.com/sprinter/shopping–tools/find–a–dealer. Please mention you are scheduling an appointment to update the software settings of the “Body controller” control unit under Recall Campaign # 2019030013. |
| Information for Owners | You may be asked for your 17-digit Vehicle Identification Number (VIN) which for your convenience is located above In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and return the updated information in the enclosed envelope.
If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations. |
You may be asked for your 17-digit Vehicle Identification Number (VIN) which for your convenience is located above In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and return the updated information in the enclosed envelope.
If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations.
A VIN-based recall lookup tool on our MBVans.com website now offers a search feature that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy performed. See www.mbvans.com/sprinter/owners-resources/recall. Should you have any questions or encounter any difficulty regarding this Recall Campaign, please contact an authorized Mercedes-Benz
Sprinter dealer. If for any reason a dealer is unable to remedy your situation, we are always happy to hear from you. Please contact us at 1-(800) FOR-MERCEDES (1-800-367-6372).
If an authorized Mercedes-Benz
Sprinter dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this situation may cause you.
Sincerely,
Mercedes-Benz
USA, LLC
1 Affected Product
Vehicle
| MERCEDES BENZ | SPRINTER (VS30) | 2019 |
6 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-19V121-3365.pdf 268.221KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V121-0540.pdf 582.508KB
Recall Acknowledgement
RCAK-19V121-6502.pdf 245.286KB
Defect Notice 573 Report
RCLRPT-19V121-9179.PDF 214.342KB
Recall Quarterly Report #1, 2019-2
RCLQRT-19V121-2317.PDF 211.126KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V121-4920.PDF 211.218KB
Latest Recalls Documents
- Compatible with Subaru 2011-2021 and 2022-up WRX/STI, 2011-2016 Impreza and 2013-2017 XV Crosstrek
- A complete set of rear bumper center fit 3-In-1 full LED rear fog light kit with mounting bracket, a True Japanese style feature that only appears in the JDM market, ensuring your ride stands out from others
- Features trendy dark tinted smoke lens, made with durable ABS plastic housing and PMMA front shell, showcasing a square shape OLED ring outlining the assembly for rear fog light (tail/running light), and brake/stop light, and center dotted pattern xenon white LED for backup reverse light
- Enhance visibility and safety with rear fog lights, designed to pierce through fog, rain, and snow with bright red illumination, ensuring drivers behind you are alerted and reducing rear-end collision risks, while adding a sporty, modern look to your car that appeals to enthusiasts
- Install Tips: Pry remove the plastic/mesh cover cap on US models, insert the LED rear fog light with the pre-installed metal mounting bracket, lock it from below the bumper using the fastening clip, and route the wire to the taillight, tapping into the tail +/- and brake + for power
- Compatible with Lexus 2013-2018 Gen6 ES250 ES350 ES300h, 2013-2020 Gen4 GS200t GS250 GS300 GS350 GS460 GS450h GS-F, ES250 ES350 ES300h, etc
- Includes a complete set of lower rear bumper corner full LED replacement light assemblies
- Made with black-out dark smoke ABS plastic lens, decorated with two strips of super bright LED diodes that illuminate along the shape of the entire reflex
- Install new LED bumper reflectors by removing the OEM bulb-less markers (typically mounted by fastener clips or screws), replace them with the full LED bumper reflector lamps, route the wires to the back of the vehicle's taillamp, and connect the black wire to ground and the red wire to the existing tail light +
- These add-on LED bumper reflectors light up together with the taillight and third brake at different positions, enhancing the layered look of your vehicle's lighting for a more standout, dimensional appearance, and guard safety at night, making your vehicle truly eye-catching and stylish on the road
- APPLICATION - Replacement for 2011-2021 Subaru WRX STI, 2011-2016 Impreza, 2013-2017 XV Crosstrek. ( for Impreza and XV Crosstrek, there are some mods/adjustments required.)
- UPGRADE 5 IN 1 MODE- This light can be wired up as a fog light (low Red), brake light (high Red), and left and right turn signal light (amber Dynamic). This light also features a very bright white LED reverse lights for additional light when reversing in the dark. It is easily switched from the driver's seat.
- 6 WIRES INSTALLATION - Black wire to the ground; White Wire to the Reversing Light; Red Wire to the Rear Fog Light; Blue Wire to the Brake Light, amber Wire, and Green Wire to the Turn Signal Light. Testing each wire on a 12V battery to connect them accordingly is highly recommended. (NOTE: Installation Guide is NOT included. Professional installation is highly recommended)
- BRIGHT THAN OEM+ QUALITY: Waterproof housing protects sensitive electrical systems. Upgrade your car with a new cool fashion rear LED fog light and improve your visibility in the rear.
- PACKAGE INCLUDE - The complete kit comes with LED rear fog light, wiring harness, back mounting bracket, T-taps, and screws. BESTVIEW offers a lifetime warranty against any manufacturing defects.
- 【Fitment】Aexploer Rear LED Fog Lights Brake Lights Assembly for H2 2005-2009.OEM Part Number,Right/Passenger Side:25952324,15100039 Left/Driver Side:25952325,15100038
- 【Fog Light+Brake Light】Our lights for H2 have two modes. One is the fog light mode which can cut through fog or rain to improve rear visibility. The other is the brake light mode that lights up when braking to warn vehicles behind. Useful in traffic jams or bad weather, they help ensure a safe distance is kept, enhancing overall driving safety.
- 【Waterproof and Durable】IP67 Waterproof! Exclusive design ensures the light can work properly in any severe weather, such as rain, snow, fog. Made of light-weight durable ABS plastic housing and tough PC lens, resistant to slight impact and scratches.
- 【Easy to Install】Plug and Play! No Drilling and Wiring Modification Needed. Simply Remove old lamp & Replace with new LED Lamp directly. Will only take about 5-10min, then give your car a uniquely designed lighting effect.Legal on the road: SAE, DOT, Approved. These fog Lights Meet OEM specifications.
- 【Package & Warranty】2pcs LED Fog Lights. This Fog Lights comes complete with 1 years warranty.
- Compatible with 2009-2020 Nissan 370Z, 2013-2017 Nissan Juke Nismo version and 2017-up Nissan Sentra Nismo ONLY (Replace OEM# 26582-3GY0A)
- A complete set of rear bumper center fit 3-In-1 full LED rear fog light kit, a True Japanese style feature that only appears in the JDM market, ensuring your ride stands out from others
- Features stylish red + dark tinted smoke lens with durable ABS plastic housing and PMMA front shell, showcasing a square shape OLED ring outlining the assembly for rear fog light (tail/running light), and brake/stop light, and center dotted pattern xenon white LED for backup reverse light
- Enhance visibility and safety with rear fog lights, designed to pierce through fog, rain, and snow with bright red illumination, ensuring drivers behind you are alerted and reducing rear-end collision risks, while adding a sporty, modern look to your car that appeals to enthusiasts
- Install Tips: Enjoy an exact fit replacement for the US models' bulb-less center accent lamp shell; Route the wires up to the taillight and tap to ground -, taillight +, brake light + and reverse light + to enable all the features
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





