“This site contains affiliate links for which OEMDTC may be compensated” |
WORK DESCRIPTION FOR FIELD MEASURE
Code: 24P5496219
Version: 2.0
Update driver assistance system control unit software
Model 192
- Always use the latest XENTRY Diagnosis software release with all available add-ons.
- Make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
- Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical system battery (greater than 12.5 V).
- If XENTRY Diagnosis is already connected to the vehicle, start with Work Procedure Step 2. If two or more software updates or SCN codings are performed during one workshop visit, operation items 02-4762 and 02-5058 may be invoiced only once for each workshop order.
Work procedure
- Connect XENTRY Diagnosis.
- Update driver assistance system (SG-FAS) control unit software.
To do this, select menu item “Quick test view → N62/4 – Driver assistance system (SG-FAS) → Adaptations → Control unit update → Update of control unit software”.
Then follow the user guidance in XENTRY Diagnosis.
The A40/13-(MFK) control units with short-range radar
(NBR-LF), (NBR-RF), (NBR-LR), and (NBR-RR) are included in the update independently.
- Disconnect XENTRY Diagnosis.
Driver Assistance System Control Unit Software Update
Model(s) GT55,GT63
Model Year 2024-2024
Mercedes-Benz
Reprogramming
All information in regard to Mercedes-Benz J2534 compliant software is available free of charge and found under the MB Workshop Resources tab on the home page of www.startekinfo.com
J2534 complaint software for Mercedes-Benz vehicles is available for purchase from Mercedes-Benz
USA.
In order to use the J2534 complaint software for Mercedes-Benz vehicles, the purchaser must furnish their own:
- Windows based PC or laptop*
- J2534 compliant interface box*1*
*Must be purchased from a third party company and are not available from Mercedes-Benz USA LLC.
*1* suggested listing of J2534 interface boxes is located within the J2534 Pass-Thru User’s Manual which is posted for view without cost under the MB Workshop Resources tab on the home page of www.startekinfo.com
Vehicle Coverage
J2534 complaint software for Mercedes-Benz vehicles has coverage for all required functions associated to reprogramming, initialization, and fault clearing of emission control modules (engine and transmission) fitted to vehicles 2004 Model Year and newer. Additionally all access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.
J2534 complaint software for Mercedes-Benz vehicles is delivered via DVD media which is delivered monthly for the license term of one year upon purchase.
- All control unit software (reprogramming calibrations) is contained within J2534 DVD media.
Terms and conditions
J2534 complaint software for Mercedes-Benz vehicles is purchased in 1-year license increments. During that license term the user will receive an initial software package, license key, SCN/CVN Coding information/access as well as monthly updates via DVD media.
- Additional updates of software after the 1st year can be purchased at additional cost, however are not required for the system to continue functioning.
For pricing and additional information via the internet, please refer to the information at the beginning of this section.
- J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 17 major automotive brands, including Chrysler
, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen, Mercedes-Benz
, and BMW, and so on, enjoy dealership-level functions at your fingertips
- All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease
- Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON's dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
- Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
- Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously - CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don't provide extra OE software
- 【J2534 PROTOCOL WITH SMARTLINKC】 LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
- 【INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSIS】 X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
- 【TOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+】 LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
- 【3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNER】 LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
- 【COMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARN】 LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABS brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler
/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- 🌐【Works with Autel Elite II Elite MS908 MS908S Pro II MS908CV II MK908P MK908 Pro II】Autel J2534 work with these tools to program ECUs on specific BM.W/ BE.NZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BM.W 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with P-C】Autel MaxiFlash Elite J2534 also supports multiple device connections to the P-C, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BM.W 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- CUSTOM-DESIGNED FOR USE WITH FORSCAN: Works with all FORScan compatible vehicles and is recommended by the FORScan Team
- DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan
- ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with “toggle switch” adapters
- MAXIMUM THROUGHPUT -- up to 20 times faster than “toggle switch” adapters
- ROCK-SOLID CONNECTION avoids data corruption and dropped packets
- [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
- [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
- [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
- [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
- [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
SEOCONTENT-START
WORK DESCRIPTION FOR FIELD MEASURE
1/1 Field measure management GCSP/TPR
Code: 24P5496219 Version: 2.0
Update driver assistance system control unit software
Model 192
Always use the latest XENTRY Diagnosis software release with all available add-ons.
Make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical
system battery (greater than 12.5 V).
If XENTRY Diagnosis is already connected to the vehicle, start with Work Procedure Step 2.
If two or more software updates or SCN codings are performed during one workshop
visit, operation items 02-4762 and 02-5058 may be invoiced
only once for each workshop order.
Work procedure
1. Connect XENTRY Diagnosis.
2. Update driver assistance system (SG-FAS) control unit software.
To do this, select menu item “Quick test view → N62/4 – Driver assistance system (SG-FAS) →
Adaptations → Control unit update → Update of control unit software”.
Then follow the user guidance in XENTRY Diagnosis.
The A40/13-(MFK) control units with short-range radar
(NBR-LF), (NBR-RF), (NBR-LR), and (NBR-RR) are included in the update independently.
3. Disconnect XENTRY Diagnosis.
Operation text and flat rate
Operation
no.
Operation text Flat rate Accounting no./
damage code
02-9334 Update driver assistance system (SGFAS)
control unit software
(with XENTRY Diagnosis connected)
0.1 h 54 962 19
02-4762* Connect/disconnect diagnostic system
(XENTRY Diagnosis)
0.1 h 54 962 19
02-5058* Connect/disconnect starter battery
charger (with XENTRY Diagnosis
connected)
0.1 h 54 962 19
* Operation item may be invoiced only once for each workshop order.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.