“This site contains affiliate links for which OEMDTC may be compensated” |
June 30, 2023
2023060008
Install Rivets on Cross-member above Rear Axle
This is to notify you of the Service Campaign Launch to install rivets on the cross-member above the rear axle on 727 Model Year (“MY”) 2023 C-Class (206 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on June 30, 2023.
Issue
Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2023 C-Class (206 platform) vehicles, the adhesive seam on the cross-member in the rear area does not correspond to current specifications. As a result, noise may occur in the rear area of the vehicle while driving and the body may be subjected to greater stress in this area.
What We’re Doing
MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will install rivets on the cross-member above the rear axle on the affected vehicles
Parts
The remedy is available and can be performed as necessary.
Install Rivets on Cross-member above Rear Axle
Work Procedure
- Remove rear seat cushion padding.
For basic information, see: AR91.12-P-1022WT.
- Remove seat backrest in rear passenger compartment completely.
For basic information, see: AR91.12-P-1713WT (except code 287 (Through-loading feature)). For basic information, see: AR91.12-P-1723WT (with code 287 (Through-loading feature)).
- Remove trunk lining.
For basic information, see: AR68.30-P-4602WT (except code ME10 (Hybrid vehicle (plug-in, PHEV)). For basic information, see: AR68.80-P-6000WT (with code ME10 (Hybrid vehicle (plug-in, PHEV)).
- Perform power disconnect for high-voltage on-board electrical system.
For basic information, see: AR47.70-P-1010AMC (with code ME10 (Hybrid vehicle (plug-in, PHEV)).
- Mark rivet holes on cross-member (A, Figure 1). Mark positions 1 and 2.
- Drill 6.7 mm rivet holes and deburr.
- Clean rivet holes and surrounding area.
- Rivet cross-member (A, Figure 2) with riveting machine at positions 1 and 2 (Figure 2 and 3). Riveting tool with a pulling force greater than 19kN as per rivet specification is needed.
Dip each rivet into primer first.
a. Use 6.5 mm x 14.5 mm rivets (A 004 990 17 97) in positions 1.
b. Use 6.5 mm x 12.5 mm rivets (A 004 990 16 97) in positions 2.
- Assemble in reverse order.
Primary Parts Information
Qty. | Part Name | Part Number |
2 | Blind rivet | A 004 990 16 97 |
2 | Blind rivet | A 004 990 17 97 |
Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting.
Install Rivets On Crossmember Above Rear Axle
Model(s) C300W,C300W4
Model Year 2023-2023
https://www.startekinfo.com/service/download-document/outside/227967/
https://static.oemdtc.com/Recall/P-SC-2023060008.pdf
- 【UNIVERSAL FIT KIT】- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
- 【TOP QUALITY】- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- 【PREFECT FOR WHAT YOU NEED】 - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- 【BONUS ACCESSORIES】- We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- 【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc.
- Universal Car Clips: 240 Pieces Push Type Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
- Widely Use & Easy To Replace: Includes 12 Most Common Sizes That Covers 6.3mm to 10mm Hole Sizes For Exact OEM Replacement Of Broken Retainers. It's Easy To Remove The Old Or Broken Clips And Replace It With Our New Retainers.
- HIGH QUALITY: Made Of Durable Nylon And Comes With A Box To Store All Your Retainers In One Place, this push type retainers set would not break or crack easily during use.
- MOST COMMON SIZES: 12 Most Common Sizes. Use our fasteners to stop worrying about fastener loss and damage.
- EASY STORAGE: Our product comes with a plastic organizer for easy organization and storage of fasteners.
- Black nylon blind rivet 3/16",Replaces for GM: 20432975 VW:175-853-57701C for Chrysler: 6503800 for Ford: N804343S
- Black nylon blind rivet 3/16",Replaces for Chrysler 6500898 ;Black nylon blind rivet 1/4",Replaces for GM # 20421672
- Black nylon blind rivet 1/4",Replaces for GM # 10184895, 20452072, for Ford # N803862-S & Chrysler # 6501559, 6506007-AA
- Black nylon blind rivet 17/64" ,Replaces for G.M. # 20433026 & VW 175-853-577A
- Black nylon blind rivet 1/4",Replaces for G.M. # 14063981, for Ford N803043-S & Chrysler 6500911
- UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
- SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
- HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
- MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
- EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
- UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
- SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit and no need to go to a auto parts store to look for different fasteners.
- HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
- MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
- Package Include:Includes 30 pcs 6mm Clips ,30 pcs 7mm Clips, 30 pcs 8mm Clips(YT:1362), 50 pcs 8mm Push Clips(YT:3143), 30 pcs 9mm Clips, 30 pcs 10mm Clips.
- PACKAGE INCLUDE: 200PCS Nylon Fastener Rivet Clips.
- DURABLE & EASY STORAGE: Nylon Bumper Fastener Rivet Clips Made of high-quality heavy-duty material. No break or crack easily during use.
- Compatibility widely: Retainer clips fasteners are mainly suitable 8mm-10mm 5/16 holes and come in a stylish black color for a more uniform look, please check the replace hole size before placing an order.
- Widely application: These Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement.
- Push-type Design Push in type, rivet post pressure expands legs for fast and tight fastening. easy to fasten Bumper Fender Flare and Mud Flap.
- ★[WHAT YOU GET] We can get a case with 150pcs nylon rivet clip kit, which contains 6 sizes of nylon rivets assortment, 25 of each, different sizes of products are placed separately to avoid confusion, which can meet our various needs. It's very convenient to have enough good clips on hand.
- ★[HIGH-QUALITY] POVTIMS pop rivet fasteners material is high-quality black nylon, nylon has anti-wear and anti-corrosion effect, strong and durable and shock-resistant, not easy to break or break. Installation does not require head and frame removal. Prolonged use also protects the car's surface from damage.
- ★[EASY TO USE] Easy to operate, even if you are not a professional car mechanic, you can easily repair your car quickly with these blind pop rivets. Save the time and expense of going to the repair shop, convenient and fast. We suggest to use it with a rivet gun (You can find the pop rivet gun in POVTIMS shop).
- ★[FIT OEM NUMBER] Type 1: 3/16" (5mm) Hole For GM 20432975; For Chrysler 6503800; For Ford N804343S. Type 2: 7/32" (6mm) Hole For BMW 517170029532, 51717002953, 51777171004. Type 3: 17/64" (7mm) Hole For GM 15955172, 20421672. Type 4: 1/4" (6mm) Hole For GM 10184895, 20452072; For Ford N803862-S; For Chrysler 6501559, 6506007-AA. Type 5: 17/64" (7mm) Hole For GM 20433026; For VW 175-853-577A. Type 6: 1/4" (6mm) Hole For GM 14063981; For Ford N803043-S; For Chrysler 6500911.
- ★[APPLICATION] Replacement for Ford, for GMC Savana, for Chrysler, Concorde, Pacifica, Dodge, Avenger, for VW. Widely used for trim panel clips, door trim clips, door panel clips, bumper clips, fender clips, engine cover, hood, air ducts, cladding, gear train, wiring repair, seats, adjusters, recliners, riser rivet, splash shield retainers.
- Universal Fit Kit: 6 popular sizes of automotive clips for door trims, radiator shoulder guards, fenders, bumpers and splash guards
- HIGH QUALITY: High quality material, heavy duty construction, durable, this car clips fasteners won't break or crack easily when in use.
- SAVE TIME AND MONEY - 120 Piece plastic screws, Enough for Your Auto Parts Replacement, No Need to Go to Auto Parts Store for Different Fasteners
- The rivet remover allows you to quickly and easily remove door panels and trim clips without damaging them for easy access to tight areas.
- Compatible with Ford, GM, Toyota, Honda and other most brand models; Applicable to replacement parts of door trim panel, radiator shield yoke, fender, bumper, side skirt, grille, engine hood and splash shield retainer
- 【Sturdy Material】 Libraton rivet gun uses all-steel construction, Reinforced carbon steel heat treatment handle increase the rivet gun body strength and service life.
- 【4 Rivet Heads】 The rivet gun kin includes four interchangeable heads 3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4.0mm) and 3/16"(4.8mm) are stored on the handle, which provides you with everything you need to start riveting. And we also provide 20pcs rivet per model.
- 【Ergonomical Design】 The pop rivet gun adopt ergonomically design allows single hand manual make work easier and improve user's work efficiency, and the thick PVC grips provide comfort and non-slip for user.
- 【Wide Application】 The rivet gun tool is perfect for securely fastening metal and heavy fabric in different construction and repair applications, can be used for automotive, HVAC, aviation, lawn furniture, railway, elevator, instrument, furniture, etc.
- 【Pop Rivet Tool Package Contents】 Hand riveter*1, 80 pcs aluminum rivets pack ( 20 pcs each size), drill bit*4. If you have any questions about our products, please never hesitate to contact us via order, our professional team will solve your problems in time for you.
- 🚗 Comprehensive Kit: Equip your customers with a complete solution. Our 265-piece car retainer clips set includes 6 popular sizes of plastic rivets, ensuring compatibility across various car models including GM, Ford, Chrysler, Toyota, Honda, Nissan, Mazda, Chevy, Jeep, and more.
- 🚗 Versatile Applications: From trim panels to door panels, bumpers, fenders, engine covers, and splash shields, Uolor car push retainer clips cater to a wide range of automotive needs. They are engineered for durability and reliability, making them ideal for both professional mechanics and DIY enthusiasts.
- 🚗 Premium Quality Materials: Crafted from high-quality nylon, our plastic fasteners are designed to withstand the rigors of everyday use without breaking or cracking easily. Whether it's telecom equipment, motor vehicles, domestic appliances, furniture, or electrical equipment, our retainer assortment ensures steadfast performance across various applications.
- 🚗 Value-added Accessories: In addition to the retainer clips, we provide 5 fastener removers and 65 vibration-resistant sponge cushions. These accessories facilitate quick and damage-free removal of car door panels and upholstery clips, enhancing user convenience and efficiency, especially in confined areas.
- 🚗 Customer Satisfaction Guaranteed: Prior to making a purchase, customers can verify the size, type, and shape of the product to ensure compatibility. We prioritize transparency and customer satisfaction, offering clear pictures and detailed descriptions for informed decision-making, backed by responsive and supportive customer service.
Last update on 2024-06-06 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Mercedes-Benz USA, LLC A Mercedes-Benz Group AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vehicle Compliance & Analysis Internal IMPORTANT SERVICE CAMPAIGN LAUNCH Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES (1-800-367-6372). Sincerely, Gregory Gunther Department Manager, Vehicle Compliance & Analysis TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM: Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services RE: Service Campaign Launch Notification Install Rivets on Cross-member above Rear Axle MY23 C-Class (206 platform) DATE: June 30, 2023 Mercedes-Benz USA, LLC A Mercedes-Benz Group AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vehicle Compliance & Analysis Internal Service Campaign Launch Notification June 30, 2023 Campaign No. : Campaign Desc. : Install Rivets on Cross-member above Rear 2023060008 23P6190208 Axle This is to notify you of the Service Campaign Launch to install rivets on the cross-member above the rear axle on 727 Model Year (“MY”) 2023 C-Class (206 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on June 30, 2023. Background Issue Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2023 C-Class (206 platform) vehicles, the adhesive seam on the cross-member in the rear area does not correspond to current specifications. As a result, noise may occur in the rear area of the vehicle while driving and the body may be subjected to greater stress in this area. What We’re Doing MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will install rivets on the cross-member above the rear axle on the affected vehicles. Parts The remedy is available and can be performed as necessary. Vehicles Affected Vehicle Model Year(s) 2023 Vehicle Model C-Class Vehicle Populations Total Campaign Population 727 Next Steps/Notes AOMS/SOMS AOMs – This campaign may generate questions from your dealers. While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES. 2 Campaign No. 2023060008, June 2023 TO: ALL MERCEDES-BENZ CENTERS SUBJECT: Model C-Class (206 platform) Model Year 2023 Install Rivets on Cross-member above Rear Axle Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2023 C-Class (206 platform) vehicles, the adhesive seam on the cross-member in the rear area does not correspond to current specifications. As a result, noise may occur in the rear area of the vehicle while driving and the body may be subjected to greater stress in this area. An authorized Mercedes-Benz dealer will install rivets on the cross-member above the rear axle on the affected vehicles. Prior to performing this Campaign: VMI must be checked before performing campaigns to verify that the campaign is required on a specific vehicle. Always check for any other open campaigns, and perform accordingly. Please review the entire Campaign bulletin and follow the repair procedure exactly as described. Approximately 727 vehicles are affected. Order No. P-SC-2023060008 2 P-SC-2023060008 Install Rivets on Cross-member above Rear Axle Work Procedure 1. Remove rear seat cushion padding. For basic information, see: AR91.12-P-1022WT. 2. Remove seat backrest in rear passenger compartment completely. For basic information, see: AR91.12-P-1713WT (except code 287 (Through-loading feature)). For basic information, see: AR91.12-P-1723WT (with code 287 (Through-loading feature)). 3. Remove trunk lining. For basic information, see: AR68.30-P-4602WT (except code ME10 (Hybrid vehicle (plug-in, PHEV)). For basic information, see: AR68.80-P-6000WT (with code ME10 (Hybrid vehicle (plug-in, PHEV)). 4. Perform power disconnect for high-voltage on-board electrical system. For basic information, see: AR47.70-P-1010AMC (with code ME10 (Hybrid vehicle (plug-in, PHEV)). 5. Mark rivet holes on cross-member (A, Figure 1). Mark positions 1 and 2. Figure 1 6. Drill 6.7 mm rivet holes and deburr. 7. Clean rivet holes and surrounding area. 3 P-SC-2023060008 8. Rivet cross-member (A, Figure 2) with riveting machine at positions 1 and 2 (Figure 2 and 3). Riveting tool with a pulling force greater than 19kN as per rivet specification is needed. Dip each rivet into primer first. a. Use 6.5 mm x 14.5 mm rivets (A 004 990 17 97) in positions 1. b. Use 6.5 mm x 12.5 mm rivets (A 004 990 16 97) in positions 2. Figure 2 Figure 3 9. Assemble in reverse order. __________________________________________________________________________________________________ 4 P-SC-2023060008 Primary Parts Information Qty. Part Name Part Number 2 Blind rivet A 004 990 16 97 2 Blind rivet A 004 990 17 97 Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting. __________________________________________________________________________________________________ Note: The following allowable labor operation should be used when submitting a warranty claim for this repair: Warranty Information Damage Code Operation Number Description Labor Time (hrs.) 61 902 08 12-1703 Operations: Position rivets on cross-member above rear axle Includes: Remove/install seat cushion padding and seat backrest for rear seat, remove/install trim in front of trunk 1.2 12-1704 Operations: Extra work for: Position rivets on cross-member above rear axle in vehicles with code 287 Includes: Remove/install left and right rear seat backrest outer parts, remove/install seat backrest for center rear seat 0.3 12-1705 Operations: Extra work for: Position rivets on cross-member above rear axle in vehicles with code ME10 Includes: Perform power disconnect of high-voltage on-board electrical system 0.3 Note: Always check Xentry Operation Time (XOT) for the current OP-Code times. Labor times are subject to change and updates may not be reflected in this document.
SEOCONTENT-END