Update Fuel System Control Unit Software – 2020 Mercedes-Benz AMG GT-Class

“This site contains affiliate links for which OEMDTC may be compensated”

2022020007

Update Fuel System Control Unit Software

This is to notify you of an Emission Service Campaign to update fuel system control unit software on 728 Model Year (“MY”) 2020 AMG GT-Class (190 platform) vehicles. The affected vehicles will be visible and flagged in VMI as “OPEN” on December 02, 2022.

 

Issue

Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2020 AMG GT-Class (190 platform), the fuel system control unit software does not correspond to the current series production configuration. It is possible that the check engine malfunction indicator lamp (‘MIL’) may not illuminate as intended.

 

What We’re Doing

MBUSA will conduct an Emission Service Campaign. An authorized Mercedes-Benz dealer will update the fuel system control unit software on the affected vehicles

 

Parts

Parts are not required for this campaign since the remedy is software based.

 


Update fuel system control unit (FSCU) software

  • Ensure use of XENTRY Diagnosis version 12/2021 or higher.
  • Before starting the work procedure, install the current version of all add-ons in XENTRY Diagnosis.
  • Make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
  • Use a battery charger to ensure sufficient power supply for the vehicles’ on-board electrical system battery (greater than 12.5 V).
  • If XENTRY Diagnosis is already connected to the vehicle, start with operation step 2.

If two or more software updates or SCN codings are performed during one workshop  visit, operation items 02-4762 and 02-5058 may be invoiced only once for each workshop order.

 

Work Procedure 

  1. Connect XENTRY Diagnosis.

 

  1. Update Fuel System Control Unit (FSCU) software.

To do so, select menu item “Quick test view – N118 control unit Fuel pump (FSCU07) – Adaptations – Control unit update – Updating of control unit software.”

Then follow the user guidance in XENTRY Diagnosis.

 

  1. Disconnect XENTRY Diagnosis.

 


Update Fuel System Software
GT,GTA,GTC,GTCA,GTR
Model Year 2020-2020

https://www.startekinfo.com/service/download-document/outside/227251/

https://static.oemdtc.com/Recall/P-SC-2022020007.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [398.69 KB]

 


 

Mercedes-Benz Reprogramming

J2534 Pass-Thru

All information in regard to Mercedes-Benz J2534 compliant software is available free of charge and found under the MB Workshop Resources tab on the home page of www.startekinfo.com

J2534 complaint software for Mercedes-Benz vehicles is available for purchase from Mercedes-Benz USA.

In order to use the J2534 complaint software for Mercedes-Benz vehicles, the purchaser must furnish their own:

  • Windows based PC or laptop*
  • J2534 compliant interface box*1*

*Must be purchased from a third party company and are not available from Mercedes-Benz USA LLC.

*1* suggested listing of J2534 interface boxes is located within the J2534 Pass-Thru User’s Manual which is posted for view without cost under the MB Workshop Resources tab on the home page of www.startekinfo.com

 

Vehicle Coverage

J2534 complaint software for Mercedes-Benz vehicles has coverage for all required functions associated to reprogramming, initialization, and fault clearing of emission control modules (engine and transmission) fitted to vehicles 2004 Model Year and newer. Additionally all access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.

J2534 complaint software for Mercedes-Benz vehicles is delivered via DVD media which is delivered monthly for the license term of one year upon purchase.

  • All control unit software (reprogramming calibrations) is contained within J2534 DVD media.

 

Terms and conditions

J2534 complaint software for Mercedes-Benz vehicles is purchased in 1-year license increments. During that license term the user will receive an initial software package, license key, SCN/CVN Coding information/access as well as monthly updates via DVD media.

  • Additional updates of software after the 1st year can be purchased at additional cost, however are not required for the system to continue functioning.

For pricing and additional information via the internet, please refer to the information at the beginning of this section.

 

Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light CarDAQ-Plus 3
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light Bosch Automotive Tools MTECH2 Mastertech II J2534
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light Autel (AULMF2534) MaxiFlash Pro
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light RAP2 OEM J2534 Remote Reprogramming Tool
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light BOSCH Automotive Tools MTECH2 Mastertech II J2534 VCI
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light Autel MaxiFlash VCI Vehicle Communication Interface J2534 PassThru ECU Programming Device Bluetooth Connection Internet Update Support CAN FD, 4 CAN Channels, DoIP, D-PDU Works with PC or Autel MS909
Update Fuel System Control Unit Software - 2020 Mercedes-Benz AMG GT-Class | small light GODIAG J2534

 

www.startekinfo.com

 


 

Bestseller No. 1
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 2
Mongoose-Plus J2534 OEM Vehicle Interface Cable - Ford/Lincoln/Mercury OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
  • Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 3
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Vehicle Communication Interface,Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MK908 Pro II, MS908CV, MK908P and PC
  • 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
  • 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
  • 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
  • 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
Bestseller No. 4
OBDLink EX FORScan OBD Adapter
  • CUSTOM-DESIGNED FOR USE WITH FORSCAN and recommended by the FORScan Team
  • DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan
  • ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with “toggle switch” adapters
  • MAXIMUM THROUGHPUT -- up to 20 times faster than “toggle switch” adapters
  • ROCK-SOLID CONNECTION avoids data corruption and dropped packets
Bestseller No. 5
VXDIAG VCX Nano GDS2 and Tech2Win Diagnostic Tool Compatible for GM/OPEL with Global Diagnostic Programming System GDS & GDS2 Blue
  • 🚗[Technical assistance] If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online
  • 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
  • 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●Supports Windows 7● CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.
  • 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
  • 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 7 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.
Bestseller No. 6
TOPDON RLink Lite J2534 Pass-Thru Programmer, Enhanced VCI, Supports DoIP/CAN/CAN FD/D-PDU/J2534/RP1210, OEM Reprogramming and Diagnostics, No OE Software Provided
  • 【ALL-IN-1 REPROGRAMMING TOOL】With its exceptional compatibility, TOPDON RLink Lite J2534 pass-thru programmer and enhanced VCI seamlessly conducts original equipment-level diagnostics, programming, and coding jobs, achieving OE-level diagnostics across various vehicle models with a single device. Note: TOPDON RLink Lite is Window-only, not compatible with Mac.
  • J2534 REPROGRAMMING TOOL】The RLink Lite functions as a J2534 pass-thru programmer to achieve OEM programming and diagnostics. Compliant with three major automotive industry standards D-PDU/J2534/RP1210, and latest DoIP/CAN/CAN FD, the RLink Lite ensures extensive vehicle coverage and speedy diagnostics.
  • 【ENHANCED VCI】The TOPDON RLink Lite operates as a versatile VCI box, enabling you to achieve advanced diagnostic, programming, and coding functionalities when paired with OE software. Moreover, TOPDON's DMS Driver Management System helps you easily master the OE software by offering drivers for various brands.***We don't provide extra OE software.
  • 【FASTER & SMOOTHER】Powered by a 1.8 GHz quad-core processor, enjoy swift response and seamless operation. The RLink Lite Enhanced VCI runs on Android 11.0 for advanced features and top-notch security. With 2GB RAM and 32GB ROM, storage is ample for smooth performance and quick access to data and apps.
  • 【PACKAGE+J2534 SUPPORT】The package comprises the RLink Lite main unit, a 2m OBDII diagnostic cable, a 5m Ethernet cable, a 1.5m USB 2.0 data cable, a 12V DC power adapter, and a quick start guide. Enjoy complimentary technical support from our dedicated TOPDON team for any J2534-related inquiries or concerns throughout the lifespan of your device.

Last update on 2024-07-16 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...