“This site contains affiliate links for which OEMDTC may be compensated” |
WORK DESCRIPTION FOR FIELD MEASURE
Correct seam seal in area of left rear lamp unit
Model 297
Work procedure
- Remove rear bumper.
For basic data, see AR88.20-P-2200EQS.
- Remove bracket (A, figure 1) from left rear bumper.
- Correct seam seal in area of left rear lamp unit.
3.1. Clean affected area.
3.2. Apply activator to the affected area (Figure 2). Observe the flash-off time of the activator!
3.3. Affix additional transparent seam seal in marked area as an aftermarket addition (Figure 2).
- Assemble in reverse order.
Parts
Quantity | Designation | Part no. |
1 | Seam seal | A 000 989 32 00 09 |
1 | Activator | A 000 989 31 00 |
Correct Seam Seal In Area Of Left Rear Lamp Unit
Model(s) EQS450V,EQS580V4
Model Year 2022
https://www.startekinfo.com/service/download-document/outside/226753/
https://static.oemdtc.com/TSB/P-SC-2022070012.pdf
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- 2 Pack Value & Complete Kit - Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps - Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready - Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance - High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- SINGLE COMPONENT FORMULA: Adheres well to bare metal, primed metal and painted surfaces
- MOISTURE CURING PROPERTY: Provides excellent performance in high heat and humidity environments
- NON-SHRINKING, NON-CRACKING: Remains flexible and offers superior results to solvent-based sealers
- QUICK PAINTABILITY: Allows painting after 30-45 minutes
- THICK CONSISTENCY: Fills large voids and can be smoothed to a featheredge or brushed
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- Vehicle Body Repair: Automotive Seam Sealer for all-purpose auto body gap filling,joint and seam sealing.Protect your vehicle from rust and corrosion with these automotive seam sealers.Ideal for car ,truck, boat, RVs.
- High Adhesive & Durable - designed this urethane sealer for a range of materials, including bare metal or painted surfaces.
- Don't Shrink and Crack - low odor single component formula auto seam sealer provides flexible,non-staining, and non-sagging.
- Easy to Use - Fast cure time.You can paint over the undercoating . For best results, allow 24 hours and scuff before painting.
- Water and Corrosion Proof - Use interior or exterior to prevent weather from eroding your car.Service Temperature -40 to 170 °F (-40 to 77 °C).High heat performance.
- For professional use only – not for retail sale
- Fast curing and skins over quickly—can be painted 60 minutes after application
- Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints
- Flexible, non-staining, and non-sagging product that will not crack or shrink
- EASY APPLICATIONS: Brushable and paintable consistency
- HIGH ADHESION: Works on both bare metal and painted surfaces
- FAST SKINNING: Starts in about 10 to 15 minutes
- STAYS IN PLACE: Less likely to drip, sag or run out of gaps being sealed
- NON-STAINING: For all-purpose autobody joint and seam sealing
- Brushable Seam Sealer is fast drying and designed exclusively for automotive uses.
- This product remains flexible and will not crack, harden, sink or sag.
- Brushable Seam Sealer is easily applied with a brush and holds a perfect brush mark to match that O.E.M. seam.
- It provides excellent adhesion, seals cracks, crevices, body seams and is ideal for use on all lap and flange seams and joints.
- Brushable Seam Sealer is paintable in 30 to 60 minutes and comes in a light gray color.
- Seals Cracks, Crevices And Body Seams, Plus Waterproofs And Insulates
- Flexible - Will Not Shrink, Harden Or Crack
- Seals Cracks, Crevices And Body Seams
- For Firewalls, Floor Pans, Trunk Seams, Fender Extensions, Taillight Openings
- Paintable In 30 Minutes
- Bonds to All Surfaces: Our seam sealer automotive formula bonds strongly with primed, painted, or bare metal surfaces, offering a fast curing solution. Ready for paint in just 30 minutes, it serves as an effective RV roof sealant and polyurethane auto body filler without the need for sanding.
- All-Weather Performance: Designed to deliver a long-lasting seal, our automotive seam sealer withstands extreme weather without shrinking or cracking. Seam seal technology ensures it remains flexible and durable for both indoor and outdoor applications, making it a versatile automotive sealant.
- Easy Application & No Prep Needed: Seamlessly compatible with any standard urethane caulk gun, this auto glass sealant offers excellent adhesion without the need for surface prep. Our car seam sealer ensures quick and professional-grade gap filling.
- Versatile Application Across Vehicles: Perfect as car body filler for boats, trucks, and RVs, this automotive paintable seam sealer ensures a seamless fit on body panel and seams. Acting as an RV seam sealer, it meets diverse automotive repair needs effectively.
- Professional Results Guaranteed: Trusted by auto repair experts across the USA, our auto body seam sealer ensures high-quality, professional repairs with every use. Satisfaction guaranteed—see the difference in your repairs!
- Seam Sealer Compound is fast curing and designed exclusively for automotive uses, Automotive Seam Sealer Black - RV Roof Sealant
- This product is a one part, high performance sealant that combines high flexibility with high ultimate strength, permanent bonds and long service life.
- These products are high quality elastomeric sealants formulated to provide excellent adhesion to a wide variety of substrates and come in an easy to use, non-sag consistency suitable for easy application with a standard caulking gun in both horizontal and vertical automotive joints.
- Smooth creamy non-sag texture – easy to tool
- High rubber content, highly elastic, good low temperature flexibility
Last update on 2024-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
WORK DESCRIPTION FOR FIELD MEASURE 1/2 Field measure management GSP/TPR Correct seam seal in area of left rear lamp unit Model 297 Work procedure 1. Remove rear bumper. For basic data, see AR88.20-P-2200EQS. 2. Remove bracket (A, figure 1) from left rear bumper. Figure 1 3. Correct seam seal in area of left rear lamp unit. 3.1. Clean affected area. 3.2. Apply activator to the affected area (Figure 2). Observe the flash-off time of the activator! 3.3. Affix additional transparent seam seal in marked area as an aftermarket addition (Figure 2). A Error! No text of specified style in document. 2/2 Field measure management GSP/TPR Figure 2 4. Assemble in reverse order. Parts Quantity Designation Part no. 1 Seam seal A 000 989 32 00 09 1 Activator A 000 989 31 00 Small parts such as screws/bolts, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting. Operation text and flat rate Operation no. Operation text Flat rate Accounting no./ damage code 02-0335 Rework seam seal in area of left rear lamp unit Includes: Remove/install rear underfloor paneling; remove/install rear bumper; extra work for: Remove/install rear bumper for vehicles with Parktronic system; remove/install rear left side bumper holder Time prescribed by foreperson 63 930 01 Mercedes-Benz Global Service & Parts
SEOCONTENT-END