“This site contains affiliate links for which OEMDTC may be compensated” |
Mercedes-Benz C-Class (W203)
Manufacturer
DaimlerChrysler (2001-2007)
Daimler AG (2007)
Production
July 18, 2000–2007
Model years
2001–2007
Chassis Family 203 C-Class
Model | Chassis | Engine |
C230 1.8 Kompressor | 203.040 | 271.948 |
C230 | 203.052 | 272.920 |
C280 | 203.054 | 272.940 |
C350 | 203.056 | 272.960 |
C240 2.6 | 203.061 | 112.912 |
C240 2.6 (w/717.4 MT) | 203.061 | 112.912 |
C320 | 203.064 | 112.946 |
C32 AMG | 203.065 | 112.961 |
C55 AMG | 203.076 | 113.988 |
C240 4MATIC | 203.081 | 112.916 |
C320 4MATIC | 203.084 | 112.953 |
C350 4MATIC | 203.087 | 272.970 |
C280 4MATIC | 203.092 | 272.941 |
C240 S | 203.261 | 112.912 |
C320 Wagon | 203.264 | 112.946 |
C240 S (Wagon) 4MATIC | 203.281 | 112.916 |
C230 Wagon 4MATIC | 203.284 | 112.953 |
C280 Wagon 4MATIC | 203.292 | 272.941 |
C230 CL 1.8 Kompressor | 203.740 | 271.948 |
C230 CL | 203.747 | 111.981 |
C320 CL | 203.764 | 112.946 |
Mercedes-Benz CLK-Class (C209)
Manufacturer
Daimler AG
Production
June 2002 – February 2010
Chassis Family 209 CLK-Class
Model | Chassis | Engine |
CLK350 | 209.356 | 272.960 |
CLK320 | 209.365 | 112.955 |
CLK550 | 209.372 | 273.967 |
CLK500 | 209.375 | 113.968 |
CLK55 AMG | 209.376 | 113.987 |
CLK63 AMG “Black Series” | 209.377 | 156.982 |
CLK350 Cabriolet | 209.456 | 272.960 |
CLK320 Cabriolet | 209.465 | 112.955 |
CLK550 Cabriolet | 209.472 | 273.967 |
CLK500 Cabriolet | 209.475 | 113.968 |
CLK55 AMG Cabriolet | 209.476 | 113.987 |
CLK63 AMG Cabriolet | 209.477 | 156.982 |
AP00.20-P-0042PIT | Reset service indicator | 10.5.12 |
MODEL 203, 209
Shown on model 209
A1p13 Multifunction display
A1r1 Instrument illumination brightness control and reset button
S110s1 Scroll forward/back button S110s3 System selection button
S111s1 Buttons + and – for setting specific functions and volume control
Resetting | ||
1 | Close trunk lid or liftgate as well as engine hood and doors | Vehicles with code (494) USA version |
2 | Turn transmitter key in electronic ignition switch (EIS) control unit to position “1” | |
3 | Press system selection button (S110s3) repeatedly until basic display “kilometer reading or temperature display” or “speed
display” is shown in multifunction display (A1p13) |
|
4 | Briefly press the instrument illumination brightness control and reset button (A1r1) 3 times | An acoustic signal can be heard and the
voltage is shown in the multifunction display (A1p13). |
5 | Turn transmitter key in electronic ignition switch (EZS) control unit to position “2” | |
6 | Press lower scroll forward/back button (S110s1) | The “Service indicator” appears in the multifunction display (A1p13). |
7 | Press instrument illumination brightness control and reset button (A1r1) once briefly | The menu “Oil type” for selecting the specification of the engine oil used appears
in the multifunction display (A1p13). |
8 | Select the engine oil grade used by pressing the + and – buttons, setting of specific functions and volume control (S111s1). | Vehicles with spark ignition engine and oil selection.
To achieve the maximum service interval, engine oil which complies with Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed. The selection option can vary depending on the engine. |
9 | Press upper scroll forward/back button (S110s1) to confirm | “Confirm oil reset, press R button for 3 s” appears in the multifunction display (A1p13). |
10 | Press and hold down instrument illumination brightness control and reset button (A1r1)
for 3 s |
“Service confirmed” appears in the multifunction display (A1p13). |
11 | Press upper scroll forward/back button (S110s1) | The “Service indicator” appears in the multifunction display (A1p13). |
12 | Press upper system selection button (S110s3) | The basic display “kilometer reading or
temperature display” or the “speed display” appears in the multifunction display (A1p13). |
13 | Turn transmitter key in electronic ignition switch (EZS) control unit to position “0” |
https://www.startekinfo.com/StarTek/outside/9519/?requestedDocId=9519
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- The information below is per-pack only
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Full synthetic 0W-40 engine oil with PurePlus Technology that is race-trusted for unbeatable engine protection*
- Pennzoil Ultra Platinum helps extend engine life and protects for up to 20 years or 750,000 miles, whichever comes first** (see warranty information in Product Description)
- Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler SRT8 HEMI engine, and the SRT Viper (Chrysler, HEMI, SRT, and SRT8 are registered trademarks of Chrysler Group LLC)
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN, ACEA A3/B3, A3/B4, & C3, MB 229.5, 229.3, & 226.5, VW 50200/50500 & 50501, BMW LL-01, Porsche A40, Renault RN0700 & RN0710, and Chrysler MS-12633/ MS-10728
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States
- Package Dimensions: 4.572 H x 22.606 L x 10.921 W (centimeters)
- Country of Origin : United States
- Package Weight: 1.899 pounds
- Fit type: Vehicle Specific
- OEM Arctic Cat Part Number: 2436-857, Replaces: 2436-689
- Advanced multigrade 4-cycle all weather formula. Superior rust and corrosion protection even during periods of nonuse.
- Offers maximum engine performance along with unique shear-stable additve formula that protects against engine wear, carbon buildup and sludge formation.
- ACX is wet-clutch certified for use in Arctic Cat Off Road wet-clutch engines.
- Automotive engine oils DO NOT meet the requirements for use in Arctic Cat Off Road ATVs equipped with a wet clutch.
Last update on 2024-06-05 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.