“This site contains affiliate links for which OEMDTC may be compensated” |
Mercedes-Benz G-Class
Manufacturer
Daimler-Benz (1979–1998)
DaimlerChrysler (1998–2007)
Daimler AG (2007–present)
Magna Steyr (2018–present)
Also called
Mercedes-Benz G-Wagen (1979–present)
Puch G
Production
SUV: 1979–present
Pickup truck: 2013–2015 (69 made)
W463, First Generation (1990–2018)
Production
1990–2018
Chassis Family 463 G-Class
Model | Chassis | Engine |
G550 | 463.237 | 273.963 |
G500 | 463.249 | 113.962 |
G55 AMG | 463.246 | 113.982 |
G55 Kompressor AMG | 463.271 | 113.993 |
G63 AMG | 463.273 | 157.984 |
AP00.20-P-0042GA | Reset service indicator | 16.10.13 |
MODEL 463.202/236/237/346
as of model year 2012
MODEL 463.272/273/274
Shown on model 172.457
A1p13 Multifunction display
S110s1 Scroll forward/back button
S110s3 System selection button
S110s4 “Back” and voice control system OFF button
S110s6 OK button
S111s3 Accept/terminate phone call button
Reset service indicator | ||
1 | Close engine hood, doors and trunk lid | |
2 | Turn transmitter key in electronic ignition lock control unit to position “1” | The standard display (kilometer counter) must appear in the multifunction display (A1p13), if necessary press scroll forwards and back button (S110s1) repeatedly. |
3 | Press the system selection button (S110s3) repeatedly until the menu item “trip” with highlighter is stored in the multifunction display (A1p13) | “Trip” remains selected for approx. 5 s. Operation step 4 must be carried out within this time. |
4 | First press and hold down Accept and end phone call button (S111s3) and then within 1 s also press and hold down OK button (S110s6) | Press and hold down Accept and end phone call button (S111s3) and OK button (S110s6) for approx. 5 s: The Workshop menu with the tabs “Vehicle data”, “Dynamometer test”, “Change brake lining” and “ASSYST PLUS” appears in the multifunction display (A1p13). |
5 | Press scroll forward/back button (S110s1) repeatedly until “ASSYST PLUS” is highlighted and confirm selection by pressing OK button (S110s6) | The indexes “Service data” and “Full service” (A1p13) appear in the multifunction display. |
6 | Press scroll forward/back button (S110s1) until “Full service” is highlighted and confirm selection by pressing OK button (S110s6) | The multifunction display (A1p13) shows the current service items, e.g. “Service 1” and “Service 3”, as well as “Confirm serv.”. |
7 | Press scroll forward/back button (S110s1) repeatedly until “Confirm serv.” is highlighted and confirm selection by pressing OK button (S110s6) | In the multifunction display (A1p13), the engine oil selection appears e.g. “Oil qual. 229.3” or “Oil qual. 229.5”. |
8 | Select specification of used engine oil using scroll forward/back button (S110s1) and confirm selection by pressing OK button (S110s6) | The multifunction display (A1p13) shows the selected oil quality and “Serv. conducted?”.
To achieve the maximum service interval in the case of vehicles with engine 270, 271 or 276, engine oil which complies with the Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed. |
9 | Press scroll forward/back button (S110s1) until “Yes” is highlighted and confirm selection by pressing OK button (S110s6) | The multifunction display (A1p13) then shows “Take-back not possible”, “Cancel” and “Confirm”. |
10 | Press scroll forward/back button (S110s1) until “Confirmation” is highlighted and confirm selection by pressing OK button (S110s6) | “Full service carried out” appears in the multifunction display (A1p13). |
11 | Press the OK button (S110s6) and press the “Back” and VCS OFF (S110s4) button repeatedly until the multifunction display (A1p13) shows the standard display (kilometer counter) | |
12 | Turn transmitter key in electronic ignition lock control unit to position “0” |
https://www.startekinfo.com/StarTek/outside/220593/?requestedDocId=220593
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- The information below is per-pack only
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Full synthetic 0W-40 engine oil with PurePlus Technology that is race-trusted for unbeatable engine protection*
- Pennzoil Ultra Platinum helps extend engine life and protects for up to 20 years or 750,000 miles, whichever comes first** (see warranty information in Product Description)
- Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler SRT8 HEMI engine, and the SRT Viper (Chrysler, HEMI, SRT, and SRT8 are registered trademarks of Chrysler Group LLC)
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN, ACEA A3/B3, A3/B4, & C3, MB 229.5, 229.3, & 226.5, VW 50200/50500 & 50501, BMW LL-01, Porsche A40, Renault RN0700 & RN0710, and Chrysler MS-12633/ MS-10728
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States
- Package Dimensions: 4.572 H x 22.606 L x 10.921 W (centimeters)
- Country of Origin : United States
- Package Weight: 1.899 pounds
- Fit type: Vehicle Specific
- OEM Arctic Cat Part Number: 2436-857, Replaces: 2436-689
- Advanced multigrade 4-cycle all weather formula. Superior rust and corrosion protection even during periods of nonuse.
- Offers maximum engine performance along with unique shear-stable additve formula that protects against engine wear, carbon buildup and sludge formation.
- ACX is wet-clutch certified for use in Arctic Cat Off Road wet-clutch engines.
- Automotive engine oils DO NOT meet the requirements for use in Arctic Cat Off Road ATVs equipped with a wet clutch.
Last update on 2024-06-05 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.