Check Exhaust System Hardware – 2012-2016 Mercedes-Benz GLK-Class, E-Class, ML-Class, GLE-Class, GL-Class

This is to notify you of an Emission Service Campaign launch to check and replace (if necessary), the exhaust system hardware on 70 Model Year (“MY”) 2012-2016 GLK-Class, E-Class, ML-Class, GLE-Class and GL-Class (204, 212 and 166 platforms) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on August 26, 2022.

 

Issue

Mercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2012-2016 GLK-Class, E-Class, ML-Class, GLE-Class, and GL-Class (204, 212 and166 platforms) vehicles, an incorrect NOx sensor, Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) catalyst and/or Particulate Matter (PM) sensor may have been installed, which may not correspond to the specifications set forth in the “BlueTEC update” Approved Emission Modification (AEM) program. The incorrect hardware may potentially result in increased exhaust gas emissions.

 

What We’re Doing

MBUSA will conduct an Emission Service Campaign in which an authorized Mercedes-BenzeBay logo dealer will check and replace (if necessary), the necessary exhaust system hardware on the affected vehicles.

 

What We’re Doing

MBUSA will conduct an Emission Service Campaign in which an authorized Mercedes-BenzeBay logo dealer will check and replace (if necessary), the necessary exhaust system hardware on the affected vehicles.

 


Check installed item numbers for NOx sensors, soot particulate (PM) sensor, Diesel Particulate Filter (DPF) and  SCR catalyst; replace if necessary

 

Check/test procedure

 

Only perform the check/test procedures mentioned below and shown in the list starting on page 5.

The stamped item numbers on the Diesel Particulate Filter (DPF) and SCR catalyst do not match the order numbers in the parts catalog.

Individual or multiple item numbers of the parts installed in the vehicle may not be identical.

 

Search for the VIN number with CTRL+F and determine the check/test procedure in the list starting on page 5.

 

  1. Check part numbers of both NOx sensors and the soot particulate sensor. The controller unit must be removed

 

Figure 1 (example for model 166: NOx sensor upstream of SCR catalyst)

 

Figure 2 (example for model 166: NOx sensor and soot particulate sensor downstream of SCR catalyst)

 

  1. Check part number on DPF.

To do this, remove the bottom rear engine compartment lining (AR61.20-P-1105*)  * Select the WIS document according to the vehicle model.

The readable part number on the DPF is only for reference with the parts table on page 5 and 6 and does not match the order number in the electronic WIS parts catalog.

 

Figure 3 (example for model 204)

 

  1. Check part number on SCR catalyst.

The readable part number of the SCR catalyst is only for reference with the parts table on page 5 and 6 and does not match the order number in the electronic WIS parts catalog.

 

Figure 4 (example for model 166)

 

  1. Compare the item number of the affected component parts actually installed in the vehicle with the item number shown in the list starting on page 5.

The installed item number must be identical to the item number shown in the list.

 

    1. Installed item number in the vehicle is not identical to the list: Carry out corresponding operation step 1, 2, 3 or 4 in the work procedure.
    2. Installed item number in the vehicle is identical to the list: End measure.

 

Work Procedure 

 

  1. Replace NOx sensor(s) (AR14.40-P-2038*).
    • Select the WIS document according to the vehicle model.

This may only be done if the item number read off does not match the item number shown in the list.

 

  1. Replace soot particulate sensor (AR49.10-P-7100*).
    • Select the WIS document according to the vehicle model.

This may only be done if the item number read off does not match the item number shown in the list.

 

  1. Replace DPF (AR14.40-P-1000*).
    • Select the WIS document according to the vehicle model.

This may only be done if the item number read off does not match the item number shown in the list.

 

  1. Replace SCR catalyst (AR14.40-P-2006*).
    • Select the WIS document according to the vehicle model.

This may only be done if the item number read off does not match the item number shown in the list.

 

  1. Assemble in reverse order.

 

Primary Parts Information

Qty. Part Name Part Number
As requiredNOx sensorA 000 905 56 12 80
As requiredNOx sensorA 000 905 57 12 80
As requiredNOx sensorA 000 905 58 12 80
As requiredSoot particulate sensorA 000 905 06 08
As requiredSoot particulate sensorA 000 905 10 08
As requiredSoot particulate filter parts kit

(Corresponding readable DPF part number A 204 490 02 00)

A 204 490 04 00 85
As requiredExhaust gas line

(Corresponding readable SCR catalyst part number A 204 490 03 00)

A 204 490 01 00 80

 


Check Exhaust System Hardware
Various Models
Model Year 2012-2016

 


 

Bestseller No. 1
CHUANGHUI Car Exterior Exhaust Pipe for Benz A B C E CLA GLC GLE GLS Class
  • The product is made of Aluminum alloy with electroplating process. The surface is bright black. Never fade
  • Easy to install ,Buckle installation, no damage to your car.Please carefully check whether the installation position of your car is consistent with the picture before buying, so as to avoid buying the wrong product. thank you
  • The exhaust pipe Decorate cover changes the ordinary exterior and adds cool design,And good protection of the original exhaust pipe
  • The product fit for Mercedes-BenzeBay logo A Class W176(A200 2016-2019,A220 2019-2020),B Class (B250 2015-2019),C Class W205 (2015-2020),E Class W212 W213 (2014-2020),CLA Class C117 (CLA 200 2017-2019,CLA 250 2017-2019),GLC Class X253 (2016-2019),GLE Class (2016-2019),GLS Class (2017-2019)
  • There may be some differences in car models of different (such as different years and configurations ).Please carefully check whether the installation part is consistent with the picture when you buy it.Thank you.
Bestseller No. 2
BDBO Stainless Steel Exhaust H Type Pipe Dual Exhaust Tips for Mercedes Benz C-Classs W204 C180 C200 C260 C300 C350 C63 Car Tailpipe Dual Exhaust Adapter Connector-Pack of 2
  • PERFECT FIT: This dual exhaust tips is perfectly compatible with C-Classs W204 C180 C200 C260 C300 C350 C63,designed from the original molding
  • DURABLE AND QUALITY MATERIAL: BDBO Tailpipe Stainless Steel Exhaust H-pipe is made of high quality material that is durable, corrosion-proof, rust-proof, water-resistant and long-lasting
  • Dramatically Improve Your Driving Experience: BDBO's Dual Exit Tailpipes, molded specifically for the W204, offer superior performance. This unique design effectively improves flow, reduces drag and increases engine output.
  • Upgrade the appearance of the vehicle: charming dual exit pipe design, polished stainless steel, fashionable appearance makes the vehicle more dynamic! Meanwhile improve the sound, add passionate dynamic sound and fun to your driving, provide more comfortable driving experience.
  • HASSLE-FREE PURCHASE:We understand that sometimes things don't work out as planned. If you're not satisfied with your purchase, simply contact us and we'll take care of the rest
Bestseller No. 3
Black Stainless Steel Exhaust Tail Muffler Tip Cover for Mercedes Benz C Class W205 E Class W213 GLC X253, Rear Bumper Exhaust Pipe Trim Decoration Accessories for Benz A B E CLA GLE GLS
  • [PERFECT FITMENT FOR MERCEDES] Highly compatible with Mercedes-BenzeBay logo A Class W176 (2016-2019), B Class (2015-2019), C Class W205 (2015-2021), E Class W212 W213 (2014-2021), CLA C117 (2017-2019), GLC X253 (2016-2021), GLE/GLS. Please verify your car's rear bumper exhaust shape matches the picture before purchasing
  • [PREMIUM 304 STAINLESS STEEL] Crafted from high-grade 304 stainless steel with an advanced electroplating process. This gloss black exhaust pipe cover is rust-proof, anti-corrosion, and will never fade, maintaining a sleek, aggressive look for your car exterior.
  • [STYLISH EXTERIOR UPGRADE] Change your car's ordinary rear exterior with this sporty tailpipe muffler decoration. It adds a sophisticated, cool design to your vehicle while providing solid protection against scratches and dust for the original exhaust pipe.
  • [EASY & SECURE INSTALLATION] Simple DIY installation with high-strength adhesive automotive tape, no drilling or damage to your car required. For optimal adhesion, thoroughly clean the surface before applying, and slightly heat the tape with a hairdryer.
  • [CUSTOMER SATISFACTION GUARANTEED] Due to variations in vehicle configurations and model years, please ensure your original tailpipe looks identical to our images. Contact us for any compatibility questions.
Bestseller No. 4
Exhaust Tail Muffler Tip for Mercedes Benz C Class w205, Rear Stainless Steel Bumper Pipe Cover for Mercedes Benz A B C E CLA GLC GLE GLS Class W212 W213 GLC Class X253(Black)
  • The product is made of 304 stainless steel with electroplating process. The surface is bright black.
  • Easy to install with adhesive tapes, no damage to your car. Clean the position before installation, and heat the tape a little for better adhesion
  • The exhaust pipe decorate cover changes the ordinary exterior and adds cool design,And good protection of the original exhaust pipe
  • The product fit for Mercedes-BenzeBay logo A Class W176(A200 2016-2019),B Class (B250 2015-2019),C Class W205 (2015-2021),E Class W212 W213(2014-2021),CLA Class C117 (CLA 200 2017-2019,CLA 250 2017-2019),GLC Class X253 (2016-2021),GLE Class (2016-2019),GLS Class (2017-2019),CLS(2018-2024)
  • There may be some differences in car models of different (such as different years and configurations ).Please carefully check whether the installation part is consistent with the picture when you buy it
Bestseller No. 5
eMagTech 1Pc Car Exhaust Clamp 304 Stainless Steel Exhaust Pipe Clamp Replacement Part A0004901241 Compatible with Mercedes Benz Central Exhaust Clamp 65mm
  • Reference OE/OEM Number: A000490124128.
  • Compatibility: Compatible with Mercedes BenzeBay logo central exhaust systems, ensuring a precise and secure connection for optimal exhaust performance.
  • 65mm Diameter: Engineered to fit exhaust pipes with a 65mm diameter, this clamp securely holds your exhaust system in place, ensuring a tight and reliable connection.
  • Material: Made from 304 stainless steel, this exhaust clamp offers excellent resistance to corrosion and rust, ensuring long-lasting durability in various weather conditions.
  • Easy Installation: Designed for straightforward installation with minimal tools, allowing for quick and efficient replacement or maintenance of your exhaust system.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...