2020-2021 Mercedes-Benz CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class & S-Class Check the Side Crash Sensor

July 12, 2021 NHTSA CAMPAIGN NUMBER: 21V527000

Side Impact Crash Sensor Connectors May Loosen

Air bags and seatbelts that don’t function as intended can increase the risk of injury during a crash.

 

NHTSA Campaign Number: 21V527

Manufacturer Mercedes-BenzeBay logo USA, LLC

Components AIR BAGS

Potential Number of Units Affected 542

 

Summary

Mercedes-BenzeBay logo USA, LLC (MBUSA) is recalling certain 2021 CLS450, AMG E53, AMG CLS53, E350, E450, AMG GT43, AMG GT53, 2020 S450, S560, G550, AMG GLC63, 2020-2021 GLC300, and AMG G63 vehicles. The side crash sensor connectors may come loose, which could delay the activation of air bags and seatbelts during a side impact crash.

 

Remedy

Dealers will inspect and replace as necessary, the side impact crash sensors, free of charge. Owner notification letters were mailed on September 3, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA’s number for this recall is 2021070032/33.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Mercedes-Benz has a Recall

 


TO: Mercedes-BenzeBay logo Dealer Principals, General Managers, Sales Managers, Service Managers, Parts ManagersFROM:  Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services
RE: Recall Campaign Initial Notification
Check the Side-impact Crash Sensor
MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class
(213, 222, 253, 257, 290 and 463 platform) 
DATE: July 16, 2021

 

IMPORTANT RECALL CAMPAIGN INFORMATION

 

Please see the attached documents related to the campaign listed above.

 

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES.

 

Sincerely,

Gregory Gunther

Department Manager, Vehicle Compliance & Analysis


Campaign No. :  NHTSA ID Campaign Desc. : Check the Side Crash Sensor
TBA 21V527 21P2197412

21P2197334

This is to notify you of a new Recall Campaign to check the side-impact crash sensors on 542 Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles.  The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “PENDING” on July 16, 2021.
Background
Issue Mercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles, the locking mechanism for the electrical connector on the side-impact crash sensors might not meet current production specifications.  In this case, the side-impact crash sensor connector might loosen over the vehicle’s lifetime. In the event of a side impact crash, this may lead to a delayed activation of the restraint systems, potentially resulting in a reduced restraint performance, which could increase the risk of injury.  When the issue occurs, a specific warning message is displayed and the SRS warning lamp is illuminated in the instrument cluster.
What We’re Doing An authorized Mercedes-BenzeBay logo dealer will check the side-impact crash sensors in the doors on the affected vehicles and replace them, if necessary.
Parts Remedy is not available at this time. An additional notification will be sent once the remedy is available.
Vehicles Affected
Vehicle Model Year(s) 2020-2021
Vehicle Model CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class
Vehicle Populations
Total Recall Population 542
Total Vehicles in Dealer Inventory 1
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new  MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired.  Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo.  Once the repair is complete the vehicle may be sold or leased.

 

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired.  As a matter of normal service process, please check for other repair measures which might be applicable to the vehicle(s)

 

Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new  MY20-21 CLS-Class, E-Class, GClass, AMG GT-Class, GLC-Class and S-Class vehicles covered by this notification until the vehicle has been repaired.

 

Next Steps/Notes
Customer Notification Timeline Customer letters will be mailed after the remedy becomes available.
AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet Partners This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer.
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 


TO: Mercedes-BenzeBay logo Dealer Principals, General Managers, Sales Managers, Service Managers, Parts ManagersFROM:  Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services
RE: Recall Campaign Launch Notification
Check the Side-impact Crash Sensor
MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class (213, 222, 253, 257, 290 and 463 platform)
DATE:  August 20, 2021

 

IMPORTANT RECALL CAMPAIGN UPDATE

 

Please see the attached documents related to the campaign listed above.

 

 

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES.

 

Sincerely,

Gregory Gunther

Department Manager, Vehicle Compliance & Analysis

 


Recall Campaign Launch NotificationAugust 20, 2021
Campaign No. :NHTSA IDCampaign Desc. :Check the Side Crash Sensor
2021070032

2021070033

21V52721P9193111

21P9193112

This is to notify you of the Recall Campaign Launch to check the side-impact crash sensors on 542 Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “OPEN” on August 20, 2021.
Background
IssueMercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles, the locking mechanism for the electrical connector on the side-impact crash sensors might not meet current production specifications. In this case, the side-impact crash sensor connector might loosen over the vehicle’s lifetime. In the event of a side impact crash, this may lead to a delayed activation of the restraint systems, potentially resulting in a reduced restraint

performance, which could increase the risk of injury. When the issue occurs, a specific warning message is displayed and the SRS warning lamp is illuminated in the instrument cluster.

What We’re DoingMBUSA will conduct a voluntary recall. An authorized Mercedes-BenzeBay logo dealer will check the side- impact crash sensors in the doors on the affected vehicles and replace them, if necessary.
PartsThe remedy is available and can be performed. Please note that the estimated replacement rate is 7%. Parts should only be ordered in the event a replacement is required.
Vehicles Affected
Vehicle Model Year(s)2020-2021
Vehicle ModelCLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class
Vehicle Populations
Total Recall Population542
Total Vehicles in Dealer Inventory0
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY20-21 CLS-Class, E-Class, G-Class, AMG GT- Class, GLC-Class and S-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo. Once the repair is complete the vehicle may be sold or leased.

 

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. As a matter of normal service process, please check for other repair measures which might be applicable to the vehicle(s).

 

Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class vehicles covered by this notification until the vehicle has been repaired.

 

Next Steps/Notes
Customer Notification TimelineCustomer letters will be mailed on September 3, 2021.
AOMS/SOMSAOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet PartnersThis recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your

preferred MBUSA dealer.

While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction.

Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 


Campaign No. 2021070032, August 2021

 

TO:ALL MERCEDES-BENZeBay logo CENTERS
SUBJECT:Models various
Model year 2020-2021
Check the Side Crash Sensor (Front and Rear Doors)

 

Mercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles, the locking mechanism for the electrical connector on the side-impact crash sensors might not meet current production specifications. In this case, the side-impact crash sensor connector might loosen over the vehicle’s lifetime. In the event of a side impact crash, this may lead to a delayed activation of the restraint systems, which could increase the risk of injury. When the issue occurs, a specific warning message is displayed and the SRS warning lamp is illuminated in the instrument cluster. An authorized Mercedes-BenzeBay logo dealer will check the side-impact crash sensors in the doors on the affected vehicles and replace them, if necessary.

 

Prior to performing this Campaign:

  • VMI must always be checked before performing campaigns to verify that the campaign is required on a specific vehicle. Always check for any other open campaigns, and perform accordingly.
  • Please review the entire Campaign bulletin and follow the repair procedure exactly as described.

 

Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

 

Approximately 138 vehicles are affected.

 

Order No. P-RC- 2021070032

 


Check airbag-pressure sensors in the front doors and rear doors and replace if necessary  Models 213, 222, 253, 257, 290, and 463

 

Check/test procedure

 

  1. Remove door lining on left and right front doors.

For basic data of models 213 and 253, see AR72.10-P-1000LW.

For basic data of model 222, see AR72.10-P-1000LF.

For basic data of models 257 and 290, see AR72.10-P-6575FR.

For basic data of model 463, see AR72.10-P-1000XG.

 

  1. Remove door lining on left and right rear doors.

For basic data of models 213 and 253, see AR72.12-P-1010LW.

For basic data of model 222, see AR72.12-P-1010LF.

For basic data of models 257 and 290, see AR72.12-P-1011FR.

For basic data of model 463, see AR72.12-P-1010XG.

 

  1. Disconnect the plugs on all four airbag pressure sensors (A, Figure 1) and check whether the two catch tabs (B, Figure 2) are present.

The door modules must not be removed!

Two catch tabs must be present!

Figure 3: Not OK depiction.

 

a. If there is only one catch tab: Carry out work procedure.

b. If two catch tabs are present: End measure.

 

Work procedure 

 

  1. Replace defective airbag pressure sensor.

Up to four airbag pressure sensors can be affected.

For basic data of models 213 and 253, see AR91.60-P-0760LW.

For basic data of model 222, see AR91.60-P-0760LF.

For basic data of models 257 and 290, see AR91.60-P-0760FR.

For basic data of model 463, see AR91.60-P-0760XG.

Contrary to the work instructions in WIS, it is not required to check the supplemental restraint system (SRS) with the diagnostic system.

 

  1. Assemble in reverse order.

 

Primary Parts Information

Qty. Part NamePart Number
As requiredAirbag pressure sensorA 213 905 14 00

 

 Note:

  • The following allowable labor operation should be used when submitting a warranty claim for this repair:

 

Warranty Information 

Operation:

(02-0634) Check airbag pressure sensor in front and rear doors on left and right
Models: 253, 257 and 290
Includes: Remove/install 4 door trims

(02-0634) Check airbag pressure sensor in front and rear doors on left and right
Models: 213 and 222
Includes: Remove/install 4 door trims

(02-0634) Check airbag pressure sensor in front and rear doors on left and right
Model: 463
Includes: Remove/install 4 door trims

(02-0635) Replace one airbag pressure sensor
(after check)
Includes: Disconnect ground line of starter battery

(02-0636)* Replace each remaining airbag pressure sensor
(one pressure sensor removed)

Damage Code Operation Number Labor Time (hrs.)
91 931 1102-0634 Models: 253, 257 and 2901.5
02-0634 Models: 213 and 2221.6
02-0634 Model: 4631.8
02-06350.3
02-0636*0.1

 

* Use operation item as often as necessary

 

Note

Always check ASRA for the current OP-Code times. Labor times are subject to change and updates may not be reflected in this document.

 

P-RC- 2021070032

 


TO: Mercedes-BenzeBay logo Dealer Principals, General Managers, Sales Managers, Service Managers, Parts ManagersFROM:  Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services
RE: Recall Campaign Launch Notification
Check the Side-impact Crash Sensor
MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class
(213, 222, 253, 257, 290 and 463 platform)
DATE:  August 20, 2021

 

IMPORTANT RECALL CAMPAIGN UPDATE

 

Please see the attached documents related to the campaign listed above.

 

 

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES.

 

Sincerely,

Gregory Gunther

Department Manager, Vehicle Compliance & Analysis

 


Recall Campaign Launch NotificationAugust 20, 2021
Campaign No. :NHTSA IDCampaign Desc. :Check the Side Crash Sensor
2021070032

2021070033

21V52721P9193111

21P9193112

This is to notify you of the Recall Campaign Launch to check the side-impact crash sensors on 542 Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “OPEN” on August 20, 2021.
Background
IssueMercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles, the locking mechanism for the electrical connector on the side-impact crash sensors might not meet current production specifications. In this case, the side-impact crash sensor connector might loosen over the vehicle’s lifetime. In the event of a side impact crash, this may lead to a delayed activation of the restraint systems, potentially resulting in a reduced restraint performance, which could increase the risk of injury. When the issue occurs, a specific warning message is displayed and the SRS warning lamp is illuminated in the instrument cluster.
What We’re DoingMBUSA will conduct a voluntary recall. An authorized Mercedes-BenzeBay logo dealer will check the side- impact crash sensors in the doors on the affected vehicles and replace them, if necessary.
PartsThe remedy is available and can be performed.  Please note that the estimated replacement rate is 7%. Parts should only be ordered in the event a replacement is required.
Vehicles Affected
Vehicle Model Year(s)2020-2021
Vehicle ModelCLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class
Vehicle Populations
Total Recall Population542
Total Vehicles in Dealer Inventory0
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY20-21 CLS-Class, E-Class, G-Class, AMG GT- Class, GLC-Class and S-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo. Once the repair is complete the vehicle may be sold or leased.

 

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. As a matter of normal service process, please check for other repair measures which might be applicable to the vehicle(s).

 

Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class vehicles covered by this notification until the vehicle has been repaired.

 

Next Steps/Notes
Customer Notification TimelineCustomer letters will be mailed on September 3, 2021.
AOMS/SOMSAOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet PartnersThis recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer.
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction.

Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 


 

Campaign No. 2021070033, August 2021

 

TO:ALL MERCEDES-BENZeBay logo CENTERS
SUBJECT:Models various
Model year 2020-2021
Check the Side Crash Sensor (Front doors only)

 

Mercedes-BenzeBay logo AG (“MBAG”), the manufacturer of Mercedes-BenzeBay logo vehicles, has determined that on certain Model Year (“MY”) 2020-2021 E-Class (213 platform), S-Class (222 platform), GLC (253 platform), CLS (257 platform), AMG GT 4-doors coupe (290 platform) and G-Class (463 platform) vehicles, the locking mechanism for the electrical connector on the side-impact crash sensors might not meet current production specifications. In this case, the side-impact crash sensor connector might loosen over the vehicle’s lifetime. In the event of a side impact crash, this may lead to a delayed activation of the restraint systems, which could increase the risk of injury. When the issue occurs, a specific warning message is displayed and the SRS warning lamp is illuminated in the instrument cluster. An authorized Mercedes-BenzeBay logo dealer will check the side-impact crash sensors in the doors on the affected vehicles and replace them, if necessary.

 

Prior to performing this Campaign:

  • VMI must always be checked before performing campaigns to verify that the campaign is required on a specific vehicle. Always check for any other open campaigns, and perform accordingly.
  • Please review the entire Campaign bulletin and follow the repair procedure exactly as described.

    Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

 

Approximately 404 vehicles are affected.

 

Order No. P-RC-2021070033

 


Check airbag pressure sensors in front doors, replace if necessary Models 213, 222, 253, 257, and 290

 

Check/test procedure

 

  1. Remove door lining on left and right front doors.

For basic data of models 213 and 253, see AR72.10-P-1000LW.

For basic data of model 222, see AR72.10-P-1000LF.

For basic data of models 257 and 290, see AR72.10-P-6575FR.

 

  1. Disconnect plug from airbag pressure sensors (A, Figure 1) of front doors and check

 

a. Only one catch tab present: Carry out work procedure.

b. Two catch tabs present: End measure.

 

Work procedure

 

  1. Replace defective airbag pressure sensor.

Up to two airbag pressure sensors may be affected.

For basic data of models 213 and 253, see AR91.60-P-0760LW.

For basic data of model 222, see AR91.60-P-0760LF.

For basic data of models 257 and 290, see AR91.60-P-0760FR.

Contrary to the work instructions in WIS, it is not necessary to check the Supplemental Restraint System (SRS) with the diagnostic system.

 

  1. Assemble in reverse order.

 

Primary Parts Information

Qty. Part NamePart Number
As requiredAirbag pressure sensorA 213 905 14 00

 

Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting.

 

 Note:

  • The following allowable labor operation should be used when submitting a warranty claim for this repair:

 

Warranty Information

Operation:

(02-0637) Check airbag pressure sensor in left and right front doors
Models: 253, 257, and 290
Includes: Remove/install 2 door trims

(02-0637) Check airbag pressure sensor in left and right front doors
Models: 213 and 222
Includes: Remove/install 2 door trims

(02-0638) Replace one airbag pressure sensor (after check)
Includes: Disconnect ground line of starter battery

(02-0639) Replace a further airbag pressure sensor (one pressure sensor removed)

Damage Code Operation Number Labor Time (hrs.)
91 931 1202-0637 Models: 253, 257, and 2900.9
02-0637 Models: 213 and 2221.0
02-06380.3
02-06390.1

 

Note

Always check ASRA for the current OP-Code times. Labor times are subject to change and updates may not be reflected in this document.

 

P-RC-2021070033

 


Mercedes-BenzeBay logo Part 573 Submission
Original Submitted to Portal July 12, 2021
Chronology-Only section
Supplement to Original Submission

 

Chronology of Defect/Noncompliance Determination

In September 2020, MBAG received an initial report from the supplier of the side impact crash sensors describing the possibility that in a certain batch of these sensors, the electrical connector housing might not meet specifications.

Subsequently, potentially affected vehicles were determined based on the production date and serial numbers of the potentially affected sensors as reported by the supplier. In October and November 2020 plant rework campaigns were started to rework potentially affected vehicles. In parallel, analysis of the vehicles’ locations showed that some vehicles with sensors from the batch identified by the supplier had already left the plant.

In December 2020, initial analyses regarding the potential effects of installing an affected sensor were conducted.

Between January and March 2021, further analyses of the potential consequences were conducted based on shaker and shock tests.  During these tests, affected sensors were exposed to vibrations and loads which are expected to occur over the vehicle’s lifetime. During these tests, the electrical connectors did not loosen despite the locking mechanism not meeting specifications.

From April 2021, the results of these tests were evaluated and the initial test results did not suggest a deterioration in the performance of the affected sensors.  In order to confirm those initial findings, additional analyses of the sensor, connector and wiring harness installation in different affected door variants were conducted in order to determine if there is a possibility of the sensor loosening on a builtup vehicle. Additionally, pull-out forces of the connectors on affected housings were measured.

In June 2021, simulations of the performance of restraint systems and occupant loads in the event of a side impact crash with an already loosened plug connection were performed. The results indicated that should a side impact crash occur in this condition, the necessary restraint systems would be activated by signals from other sensors within the SRS system.

While the analysis indicated that it is unlikely that an affected connector could loosen over the lifetime of the vehicle,  it is possible the detection of a side impact crash and activation of the restraint systems might be delayed, which would result in a reduced restraint and protection performance of the vehicle.

On July 2, 2021, MBAG determined that a potential safety risk cannot be ruled out and decided to conduct a recall.

 



15 Affected Products

Vehicles

MAKEMODELYEAR
MERCEDES-BENZeBay logoAMG CLS532021
MERCEDES-BENZeBay logoAMG E532021
MERCEDES-BENZeBay logoAMG G632020-2021
MERCEDES-BENZeBay logoAMG GLC632020
MERCEDES-BENZeBay logoAMG GT432021
MERCEDES-BENZeBay logoAMG GT532021
MERCEDES-BENZeBay logoCLS4502021
MERCEDES-BENZeBay logoE3502021
MERCEDES-BENZeBay logoE4502021
MERCEDES-BENZeBay logoG5502020
MERCEDES-BENZeBay logoGLC3002020-2021
MERCEDES-BENZeBay logoS4502020
MERCEDES-BENZeBay logoS5602020

 


15 Associated Documents

Recall Acknowledgement

RCAK-21V527-1991.pdf 645.103KB

 


Defect Notice 573 Report

RCLRPT-21V527-4233.PDF 220.292KB

 


Chronology

RMISC-21V527-0048.pdf 67.821KB

 


Recall 573 Report – Amendment 1

RCLRPT-21V527-3955.PDF 220.289KB

 


Recall 573 Report – AMENDMENT 2

RCLRPT-21V527-9496.PDF 220.299KB

 


Recall 573 Report – AMENDMENT 3

RCLRPT-21V527-3452.PDF 220.288KB

 


Manufacturer Notices(to Dealers,etc) – Recall Campaign Initial Notification , Check the Side-impact Crash Sensor

RCMN-21V527-2369.pdf 201.036KB

 


Recall Quarterly Report #2, 2021-4

RCLQRT-21V527-3805.PDF 211.248KB

 


Remedy Instructions and TSB

RCRIT-21V527-7544.pdf 479.761KB

 


Remedy Instructions and TSB

RCRIT-21V527-9489.pdf 449.499KB

 


Recall 573 Report – AMENDMENT 4

RCLRPT-21V527-5018.PDF 220.305KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V527-9149.pdf 212.571KB

 


Manufacturer Notices(to Dealers,etc)- Recall Campaign Launch Notification Check the Side-impact Crash Sensor MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class(213, 222, 253, 257, 290 and 463 platform)

RCMN-21V527-7741.pdf 595.265KB

 


Manufacturer Notices(to Dealers,etc)- Recall Campaign Launch Notification Check the Side-impact Crash Sensor MY20-21 CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class and S-Class(213, 222, 253, 257, 290 and 463 platform)

RCMN-21V527-5610.pdf 564.908KB

 


Recall Quarterly Report #3, 2022-1

RCLQRT-21V527-3677.PDF 211.33KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
OBDMATE OBD2 Scanner with ABS <a title=SRS Transmission, Reset Fault Lights | Check Engine Code Reader with Full OBDII Functions | DLC Pin Test | Battery Voltage Check, Car Diagnostic Tool" title="2020-2021 Mercedes-Benz CLS-Class, E-Class, G-Class, AMG GT-Class, GLC-Class & S-Class Check the Side Crash Sensor 2">
OBDMATE OBD2 Scanner with ABS SRS Transmission, Reset Fault Lights | Check Engine Code Reader with Full OBDII Functions | DLC Pin Test | Battery Voltage Check, Car Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
Bestseller No. 2
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 3
Innova SD35 OBD2 Scanner – ABS, SRS, TPMS & Check Engine Code Reader, Live Data, All System Diagnostics, Compatible with Most Vehicles
  • OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
  • ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
  • OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
  • ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
  • WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, DodgeeBay logo, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
SaleBestseller No. 4
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
SaleBestseller No. 5
Full Systems OBD2 Scanner Car Diagnostic Tool with ABS SRS Transmission Etc
  • 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
  • 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
  • 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
  • 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
  • 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...