WORK DESCRIPTION FOR FIELD MEASURE Version: 2.0 Code: 24P6990004   Replace rear-end center section cover fastening clips Model 192   Work procedure 1. Remove rear-end center section cover and replace fastening clips. For basic data, see (AR68.30-P-4786SLY) The green clips are replaced with orange clips.   2. Assemble in reverse order.   Parts Quantity Designation ... Read more

The post Replace Trim Clips in Trunk – 2024 Mercedes-Benz GT first appeard on Mercedes-Benz & Smart - OEMDTC and is written by oemdtc

WORK DESCRIPTION FOR FIELD MEASURE Code: 24P6792003 Version: 2.0   Seal both side windows in rear Model 192   Work Procedure           When inserting the sealing lip (Figure 5, 2), watch out for possible sealant leaks and remove them if necessary.     When inserting the sealing frame (Figure 6, 1), ... Read more

The post Seal Rear Side Windows – 2024 Mercedes-Benz GT first appeard on Mercedes-Benz & Smart - OEMDTC and is written by oemdtc

DATE: March, 2024 2024020015 Inspect Propeller Shaft Check Strap on Crossmember This is to notify you of a Service Campaign to inspect the propeller shaft check strap on crossmember on approximately  81 MY 2019-2023 Mercedes-Benz Sprinter Vans.  All affected VINs will be flagged as “OPEN” in VMI   Issue Mercedes-Benz AG, the manufacturer of Sprinter ... Read more

The post Inspect Propeller Shaft Check Strap on Crossmember – 2019-2023 Mercedes-Benz Sprinter first appeard on Mercedes-Benz & Smart - OEMDTC and is written by oemdtc

March 15, 2024 2024020011 Wax Inside of Integral Carrier This is to notify you of the Service Campaign Launch to install preservation wax on the inside of the integral carrier on 3,638 Model Year (“MY”) 2023-2024 EQE Sedan (295 platform) vehicles. The vehicles will be visible and flagged in VMI as “OPEN” on March 15, ... Read more

The post Wax Inside of Integral Carrier – 2023-2024 Mercedes-Benz EQE first appeard on Mercedes-Benz & Smart - OEMDTC and is written by oemdtc

WORK DESCRIPTION FOR FIELD MEASURE Code: 24P6392004 Version: 1.0   Rework side wall on longitudinal member on right and left Model 236    Work procedure  For basic data, see AR88.80-P-6000WEB.   Rework seam seal only in affected area (A, Figure 1) on right and left sides.     Parts Quantity Designation Part no. 1 Activator ... Read more

The post Rework Side Wall on Longitudinal Member on Right and Left – 2024 Mercedes-Benz CLE first appeard on Mercedes-Benz & Smart - OEMDTC and is written by oemdtc