Replace Battery Mounting Bracket – 2018-2019 Mercedes-Benz C-Class

“This site contains affiliate links for which OEMDTC may be compensated”

August 9, 2019 NHTSA CAMPAIGN NUMBER: 19V586000

Battery may not be Secured

Loss of power from the battery can impair post-crash functions, such as communicating with emergency services and activating hazard lights. The battery may also detach and become a road hazard. Either of these scenarios can increase the risk of injury.

 

NHTSA Campaign Number: 19V586

Manufacturer Mercedes-Benz USA, LLC.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 26,584

 

Summary

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018-2019 C300, C300 4MATIC, and C43 AMG 4MATIC vehicles. The mounting bracket for the 12-volt battery may not be secured. This may allow the battery to shift, possibly disconnecting the terminals in the event of a crash.

 

Remedy

MBUSA will notify owners, and dealers will replace the battery mounting bracket, free of charge. The recall began October 18, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA’s number for this recall is 2019090010.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Mercedes-Benz has a Recall

 


TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM: Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services
RE: Recall Campaign Launch Notification
Replace Battery Mounting Bracket
MY18-19 C-Class (205 Platform)
DATE: October 15, 2019

 

IMPORTANT RECALL CAMPAIGN UPDATE

Please see the attached documents related to the campaign listed above.

 

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 

Sincerely,

Gregory Gunther

Department Manager, Vehicle Compliance & Analysis


Recall Campaign Launch Notification October 15, 2019
Campaign No. : NHTSA ID Campaign Desc. : Replace Battery Mounting Bracket
2019090010 19V586 19P5490029
This is to notify you of a Recall Campaign Launch to update the battery mounting bracket on 26,584 Model Year (“MY”) 2018-2019 C-Class (205 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers.

Affected VINs will be flagged in VMI as “OPEN” on October 15, 2019.

Background
Issue Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2018-2019 C-Class vehicles (205 platform), the mounting bracket for the 12V starter battery might not have been manufactured according to current production specification. If the battery is not properly secured, it could shift and disconnect the terminals in the event of a crash. If this were to occur, the vehicle’s power supply would be interrupted, impairing different post-crash functionalities. Furthermore, if the battery detaches from the vehicle in a crash, it could become a road hazard. Either of these scenarios can increase the risk of injury.
What We’re Doing MBUSA will conduct a voluntary recall. An authorized Mercedes-Benz dealer will replace the battery mounting bracket on the affected vehicles.
Parts Parts are available and can be ordered as necessary
Vehicles Affected
Vehicle Model Year(s) 2018-2019
Vehicle Model C-Class
Vehicle Populations
Total Recall Population 26,584
Total Vehicles in Dealer Inventory 826
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY18-19 C-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo Once the repair is complete, the vehicle may be sold or leased.

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired.

Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY18-19 C-Class vehicles covered by this notification until the vehicle has been repaired.

Next Steps/Notes
Customer Notification Timeline Customer letters will be mailed approximately one week after the remedy becomes available.
AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
 

Rental Fleet Partners

This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer.
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction.

Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 


Campaign No. 2019090010, October 2019

TO: ALL MERCEDES-BENZ CENTERS
SUBJECT: Model C-Class vehicles (205 platform)
Model Year 2018-2019
Replace Battery Mounting Bracket

 

Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2018-2019 C-Class vehicles (205 platform), the mounting bracket for the 12V starter battery might not have been manufactured according to current production specification. If the battery is not properly secured, it could shift and disconnect the terminals in the event of a crash. If this were to occur, the vehicle’s power supply would be interrupted, impairing different post-crash functionalities. Furthermore, if the battery detaches from the vehicle in a crash, it could become a road hazard. Either of these scenarios can increase the risk of injury. An authorized Mercedes-Benz dealer will replace the battery mounting bracket on the affected vehicles.

 

Prior to performing this Recall Campaign:

  • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. Always Check VMI for any open campaigns, and perform
  • Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.

 

Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

 

Approximately 26,584 vehicles are involved.

 

Order No. P-RC-2019090010

This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records.


Procedure

 

  1. Open hood and remove battery cover (1, figure 1).

battery cover

Figure 1

 

  1. Replace holder at battery frame ( 23 Nm A, figure 1). For basic data, see 10-P-0005LW.
  2. Assemble in reverse order.

 

 

 

Primary Parts Information 

Qty. Part Name Part Number Estimated Replacement Rate
1 Battery frame holder A 205 620 28 02 100%

 

Warranty Information

Operation: Replace a holder at battery frame (02-3692)

Damage Code Operation Number Labor Time (hrs.)
54 900 29 7 02-3692 0.3

 

Note

Operation Number labor times are subject to change.

 

P-RC-2019090010

 


IMPORTANT SAFETY RECALL 2019090010
This notice applies to your vehicle, VIN:
Replace Battery Mounting Bracket
NHTSA Recall #19V586

 

October, 2019

 

  • A remedy is available for your vehicle.
  • Schedule an appointment with your authorized Mercedes-Benz dealer as soon as possible.
  • This repair will be provided free of charge.

 

Dear Mercedes-Benz Owner,

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has decided that a defect which relates to motor vehicle safety exists in certain Model Year (“MY”) 2018-2019 C-Class vehicles. Our records indicate that your vehicle is included in the affected population of vehicles.

What is the CONCERN? DAG has determined that on certain MY 2018-2019 C-Class vehicles (205 platform) the mounting bracket for the 12V starter battery might not have been manufactured according to current production specification. If the battery is not properly secured, it could shift and disconnect the terminals in the event of a crash. If this were to occur, the vehicle’s power supply would be interrupted, impairing different post-crash functionalities. Furthermore, if the battery were to detach from the vehicle in a crash, it could become a road hazard. Either of these scenarios can increase the risk of injury.
What will your DEALER DO? An authorized Mercedes-Benz dealer will replace the battery mounting bracket on the affected vehicles. This service will be provided free of charge. We are dedicated to always delivering the best customer experience, and respect for your time is a top priority. While the minimum repair time can  be up to 30 minutes, your dealer can provide you with a better estimate of the overall time for this service visit. As a matter of normal service process, an authorized Mercedes-Benz dealer will also check for other repair measures which might be applicable to your vehicle and this may increase the required working time.
What should YOU DO? For additional information and to schedule an appointment, please contact your preferred authorized Mercedes-Benz dealer at your earliest convenience. To locate authorized dealers see www.mbusa.com/recall. Please mention you are scheduling an appointment to replace the battery mounting bracket under Recall Campaign #2019090010.

You may be asked for your 17-digit Vehicle Identification Number (VIN) which for your convenience is located above your name at the top of this letter.

Information for Owners In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and return the updated information in the enclosed envelope.

If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations.

 

To find the most convenient authorized Mercedes- Benz dealer from your smartphone, scan the QR code to the left.

 

A VIN-based recall lookup tool on our MBUSA.com website now offers a search feature that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy performed. See www.mbusa.com/recall. Should you have any questions or encounter any difficulty regarding this Recall Campaign, please contact an authorized Mercedes-Benz dealer. If for any reason a dealer is unable to remedy your situation, we are always happy to hear from you. Please contact us at 1-(800) FOR-MERCEDES (1-800-367-6372).

If an authorized Mercedes-Benz dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to https://www.safercar.gov.

We apologize for any inconvenience this situation may cause you. Sincerely,

 

IMPORTANT VIN:

If for any reason YOU NO LONGER OWN THIS VEHICLE OR have a CHANGE OF ADDRESS, please COMPLETE THE SECTION BELOW, place in the ENCLOSED ENVELOPE, and DROP IN ANY MAIL BOX. If possible, provide the name and address of the present owner so that we may contact them.

 


TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM:  Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services
RE: Recall Campaign Initial Notification
Replace Battery Mounting Bracket
MY18-19 C-Class (205 Platform)
DATE: August 16,2019

 

IMPORTANT RECALL CAMPAIGN INFORMATION

Please see the attached documents related to the campaign listed above.

 

Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FORMERCEDES.

 

Sincerely,
Gregory Gunther
Department Manager, Vehicle Compliance & Analysis

 

Campaign No. :  NHTSA ID Campaign Desc. : Replace Battery Mounting Bracket
TBA 19V586 PEND BTRY MNTG BRKT
This is to notify you of a new Recall Campaign regarding the battery mounting bracket on 26,584 Model Year (“MY”) 2018-2019 C-Class (205 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “PENDING” on August 16, 2019.
Background
Issue Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2018-2019 C-Class vehicles (205 platform) the mounting bracket for the 12V starter battery might not have been manufactured according to current production specification. If the battery is not properly secured, it could shift and disconnect the terminals in the event of a crash. If this were to occur, the vehicle’s power supply would be interrupted, impairing different post-crash functionalities. Furthermore, if the battery detaches from the vehicle in a crash, it could become a road hazard, increasing the risk of injury for other road users.
What We’re Doing MBUSA will conduct a voluntary recall. An authorized Mercedes-Benz dealer will replace the battery mounting bracket on the affected vehicles.
Parts A remedy is not yet available. An additional notification will be sent once a remedy is available.
Vehicles Affected
Vehicle Model Year(s) 2018- 2019
Vehicle Model C-Class
Vehicle Populations
Total Recall Population 26,584
Total Vehicles in Dealer Inventory 1,057
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY18-19 C-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired.  Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo Once the repair is complete, the vehicle may be sold or leased.

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. 

Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY18-19 C-Class vehicles covered by this notification until the vehicle has been repaired.

Next Steps/Notes
Customer Notification Timeline Customer letters will be mailed approximately one week after the remedy becomes available.
AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet Partners This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer.
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 


IMPORTANT SAFETY RECALL
This INTERIM notice applies to your vehicle,
Replace Battery Mounting Bracket
NHTSA Recall #19V586

 

October, 2019

 

Dear Mercedes-Benz Owner,

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has decided that a defect which relates to motor vehicle safety exists in certain Model Year (“MY”) 2018-2019 C-Class vehicles. Our records indicate that your vehicle is included in the affected population of vehicles. The purpose of this letter is to explain what the recall is about, what we are doing to correct it, and when parts will be available.

 

What is the Concern?

DAG has determined that on certain Model Year (“MY”) 2018-2019 C-Class vehicles (205 platform) the mounting bracket for the 12V starter battery might not have been manufactured according to current production specification. If the battery is not properly secured, it could shift and disconnect the terminals in the event of a crash. If this were to occur, the vehicle’s power supply would be interrupted, impairing different post-crash functionalities. Furthermore, if the battery detaches from the vehicle in a crash, it could become a road hazard.

To remedy this recall issue, an authorized Mercedes-Benz dealer will replace the battery mounting bracket on the affected vehicles. Unfortunately, the parts to remedy this are not yet available.

We are working to obtain the necessary parts to correct this condition as quickly as possible. As parts become available, we will send you another letter asking you to take your vehicle to an authorized Mercedes-Benz dealer to have the recall completed free of charge.

Should you have any concerns or questions regarding your vehicle before you receive the next recall letter, please contact an authorized Mercedes-Benz dealer. If for any reason a dealer is unable to remedy your situation once parts are available, we are always happy to hear from you. Please contact us at 1-(800) FOR-MERCEDES (1-800-367-6372). A new vehicle identification number (VIN)-based recall lookup tool, on our MBUSA.com website, now offers a search function that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy performed. Please visit www.MBUSA.com/recall.

If you are no longer the vehicle owner, or have a change of address, please complete the reverse side of this letter and return the complete letter in the enclosed envelope. If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 days to comply with federal regulations.

If a Mercedes-Benz dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to https://www.safercar.gov.

We regret any inconvenience this situation may cause you.

Sincerely,

 

IMPORTANT VIN:

If for any reason YOU NO LONGER OWN THIS VEHICLE OR have a CHANGE OF ADDRESS, please COMPLETE THE SECTION BELOW, place in the ENCLOSED ENVELOPE, and DROP IN ANY MAIL BOX. If possible, provide the name and address of the present owner so that we may contact them.

 

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
MERCEDES BENZ C300 2018-2019
MERCEDES BENZ C43 AMG 2018-2019

 


13 Associated Documents

Recall Quarterly Report #2, 2020-1

RCLQRT-19V586-4210.PDF 211.239KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #1, 2019-4

RCLQRT-19V586-0311.PDF 211.131KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #3, 2020-2

RCLQRT-19V586-6725.PDF 211.327KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Defect Notice 573 Report

RCLRPT-19V586-5890.PDF 216.631KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.55 KB]

 


Manufacturer Notices(to Dealers,etc) – RE: Recall Campaign Initial Notification Replace Battery Mounting Bracket MY18-19 C-Class (205 Platform)

RCMN-19V586-9830.pdf 169.854KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [165.87 KB]

 


Recall 573 Report – AMENDMENT 1

RCLRPT-19V586-3961.PDF 216.773KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.69 KB]

 


Recall Acknowledgement

RCAK-19V586-2217.pdf 244.953KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.21 KB]

 


Remedy Instructions and TSB

RCRIT-19V586-7353.pdf 176.032KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [171.91 KB]

 


Manufacturer Notices(to Dealers,etc) – Recall Campaign Launch Notification Replace Battery Mounting Bracket MY18-19 C-Class (205 Platform) dated 10/15/19.

RCMN-19V586-1106.pdf 338.871KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [330.93 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V586-4662.pdf 230.595KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [225.19 KB]

 


Recall 573 Report – Amendment 2

RCLRPT-19V586-8740.PDF 216.821KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.74 KB]

 


Recall 573 Report – Amendment 3

RCLRPT-19V586-3547.PDF 216.777KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.70 KB]

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-19V586-6549.pdf 155.063KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [151.43 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V586&docType=RCL

 


 

Bestseller No. 1
Automotive, Marine, Boat, RV Battery Tray - Group 27 Series with Strap, Battery Holder (27 Series)
  • Extreme-duty battery tray for Automotive, Marine, RV batteries
  • Battery Tray is constructed from high impact, heavy polypropylene plastic
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
  • Accommodates 27 series batteries up to 7" x 12.5", Safety Strap and buckle are included.
  • 8 mounting points (4 per long length)
Bestseller No. 2
Attwood 9099-5 Battery Tray With Strap, 29/31 Series Battery, 12 7/8-Inches L x 7-Inches W, For Up to 10 1/2 Inches Tall
  • Reliable battery holder that fits into limited spaces
  • Simple to install
  • For 29/31 Series battery up to 10 1/2 inches tall
  • Molded base mounts easily with 4 #10 panhead fasteners
  • Battery remains easily accessible for charging or replacing
Bestseller No. 3
Camco Camper/RV Standard Battery Hold-Down Tray | Holds 24/24M Automotive Batteries | Fits Batteries Up to 11 1/8" L x 6 ¾" W x 8" H (55394)
  • Holds Batteries in Place: Safely holds group 24/24M automotive batteries to prevent movement during transportation
  • Safe and Durable Construction: Constructed of heavy-duty, acid-resistant plastic with stainless steel hardware
  • Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)
  • Overall Dimensions: 11 9/16-inches (L) x 8 ½-inches (W) x 9 5/8-inches (H)
  • Includes: (1) tray, (2) rods, (1) cross bar and (1) knob
SaleBestseller No. 4
Metal Steel Battery Mounting Box Tray Bracket DIY,Easy Bolt-In Battery Tray,Overall Length - Fits up to a 10.63” × 7.06” × 7.5” Battery, Anti-corrosion, No Rusting
  • 【Powerful Support】 The whole battery tray is made of steel. The steel sheet is connected to the steel sheet, the material is strong and has strong support, can easily carry the weight of the battery
  • 【Longer Life】The battery box has multiple round holes that facilitate air circulation and reduce water retention. The round holes also facilitate heat dissipation, which can improve battery life
  • 【Adjustable Size】The battery tray has adjustable bolts. This battery tray can hold batteries up to 10.63 "L × 7.06 "W × 7.5 "H, so it's compatible with most sizes of batteries. Please make sure that it is compatible with the size of the battery being used before selecting it.
  • 【Easy to install & Wide applications】The Battery mounting box adopts simple bolt-on design, no need to re-solder. Easy to install, easy to disassemble, save more time and money. Can be used in a variety of scenarios, such as car racks, camping, self-built cabins or boat cabins
  • 【More Sately】The surface of the battery bracket adopts flame retardant plastic spraying process, which effectively prevents oxidation, rust and corrosion. The main material of the battery bracket is carbon steel, which has good insulating properties and prevents the spread of battery leakage, providing higher safety.
Bestseller No. 5
Dorman 00097 Driver Side Battery Tray Replacement Compatible with Select Cadillac/Chevrolet/GMC Models
  • Direct replacement - this battery tray matches the fit and function of the original equipment part
  • Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery
  • Cost-effective solution - offers original equipment quality at lower cost than dealer replacement
  • Quality tested - this part has undergone vehicle fitment and dimensional testing
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Bestseller No. 6
Camco RV Large Battery Hold-Down Tray | Holds Automotive, RV, and Marine Batteries to Stop Movement during Transportation | (55404), black, 1 Count (Pack of 1)
  • Holds Batteries in Place: Safely holds group 27, 30 and 31 automotive, RV and marine batteries to stop movement during transportation.Fit Type: Universal Fit
  • Safe and Durable Construction: Constructed of heavy-duty, acid-defiant plastic with stainless steel hardware
  • Fit: Fits batteries up to 12 11/16-inches (L) x 6 ¾-inches (W) x 8 ¾-inches (H)
  • Overall Dimensions: 13 1/8-inches (L) x 8 ½-inches (W) x 10 3/8-inches (H)
  • Includes: (1) tray, (2) rods, (1) cross bar and (2) knobs
Bestseller No. 7
Attwood 9092-5 Battery Tray with Strap, 24/24M Series Battery, 7-Inches L x 11-Inches W, for Up to 10 1/2 Inches Tall
  • Inside Dimensions: 7" L x 11" W, Battery Series: 24/24M
  • A simple-to-install battery holder that fits into a limited space. For batteries up to 10-1/2" in height
  • Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle
  • Molded base mounts with four #10 panhead screws.
SaleBestseller No. 8
THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)
  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
  • The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
Bestseller No. 9
NOCO BT24S Group 24 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
SaleBestseller No. 10
Attwood 9096-5 USCG-Approved 24 Series Heavy Duty Adjustable Hold-Down Marine Boat Battery Tray, Black
  • Includes adjustable height crossbar and stainless steel retaining fasteners.
  • Meet ABYC Standard E-10 and U.S. Coast Guard requirements.
  • Install with #10 fasteners (not included)
  • Fits 24 series batteries
  • Attwood is a member of the American Boat and yacht Council and the National Marine Manufactures Association

Last update on 2024-03-27 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...