“This site contains affiliate links for which OEMDTC may be compensated” |
June 14, 2019 NHTSA CAMPAIGN NUMBER: 19V459000
Improper Weld May Allow Water To Leak In
Water in the passenger compartment may affect the vehicle’s electrical systems, increasing the risk of a crash or injury.
NHTSA Campaign Number: 19V459
Manufacturer Mercedes-Benz USA, LLC.
Components STRUCTURE
Potential Number of Units Affected 753
Summary
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2020 GLE350 4Matic and GLE450 4Matic vehicles. A welding error during production may have resulted in a small hole in the floor, possibly allowing water to leak into the passenger cabin.
Remedy
MBUSA will notify owners, and dealers will seal the affected area, free of charge. The recall began July 31, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA’s number for this recall is 2019060007.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Mercedes-Benz has a Recall
TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services |
RE: Recall Campaign Launch Notification Water Ingress into Right Side of Passenger Compartment MY20 167 (GLE-Class) |
DATE: July 12, 2019 |
IMPORTANT RECALL CAMPAIGN UPDATE
Please see the attached documents related to the campaign listed above.
Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FOR-MERCEDES.
Sincerely,
Gregory Gunther
Department Manager, Vehicle Compliance & Analysis
Recall Campaign Launch Notification | July 12, 2019 | |||
Campaign No. : | NHTSA ID | Campaign Desc. : | Right Side Water Ingress | |
2019060007 | 19V459 | 19P6190203 | ||
This is to notify you of a new Recall Campaign regarding the potential for water ingress into the right side of the passenger compartment on 753 Model Year (“MY”) 2020 GLE-Class (167 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “OPEN” on July12, 2019. | ||||
Background | ||||
Issue | Daimler AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2020 GLE-Class vehicles (167 platform), a welding stud on the main floor may not have been welded according to specification. As a result, a small hole may be present in the main floor in the vehicle’s underbody. If the vehicle were to attempt to cross standing water over 15 inches deep, some water could enter the vehicle passenger compartment via the hole in the main floor on the right-side of the vehicle. If sufficient amounts of water enter the vehicle, several electrical contacts could be affected, impacting their functionality. Additionally, a risk of engine stalling cannot be ruled out, increasing the risk of a crash. | |||
What We’re Doing | MBUSA will conduct a voluntary recall. An authorized Mercedes-Benz dealer will seal the hole in the main floor on the affected vehicles. | |||
Parts | Parts are available and can be ordered as necessary. | |||
Vehicles Affected | ||||
Vehicle Model Year(s) | 2020 | |||
Vehicle Model | GLE-Class | |||
Vehicle Populations | ||||
Total Recall Population | 753 | |||
Total Vehicles in Dealer Inventory | 23 | |||
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY20 GLE-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo Once the repair is complete, the vehicle may be sold or leased.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. As a matter of normal service process, please check for other repair measures which might be applicable to the vehicle(s) Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY20 GLE-Class vehicles covered by this notification until the vehicle has been repaired. |
||||
Next Steps/Notes | ||||
Customer Notification Timeline | Customer letters will be mailed approximately one week after the remedy becomes available. | |||
AOMS/SOMS | AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | |||
Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer. | |||
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES. |
Campaign No. 2019060007, July 2019
TO: | ALL MERCEDES-BENZ CENTERS |
SUBJECT: | Model GLE-Class vehicles (167 platform) Model Year 2020 Rework weld studs on vehicle floor in right footwell |
Daimler AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2020 GLE-Class vehicles (167 platform), a welding stud on the main floor may not have been welded according to specification. As a result, a small hole may be present in the main floor in the vehicle’s underbody. If the vehicle were to attempt to cross standing water over 15 inches deep, some water could enter the vehicle passenger compartment via the hole in the main floor on the right-side of the vehicle. If sufficient amounts of water enter the vehicle, several electrical contacts could be affected, impacting their functionality. Additionally, a risk of engine stalling cannot be ruled out, increasing the risk of a crash. An authorized Mercedes-Benz dealer will seal the hole in the main floor on the affected vehicles.
Prior to performing this Recall Campaign:
- Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. Always Check VMI for any open campaigns, and perform accordingly.
- Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.
Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.
Approximately 753 vehicles are involved.
Procedure
- Remove right front floor covering.
For basic data, see AR68.80-P-0008ME.
- Remove wear protection cover.
For basic data, see AR54.15-P-1351ME.
The wear protection is marked as number 3 in the AR document.
- Seal weld studs on vehicle floor in right footwell all around (Figure 1). Observe drying time of seam seal.
Primary Parts Information
Qty. | Part Name | Part Number | Estimated Replacement Rate |
1 | Seam seal | A 002 989 63 98 | 100% |
Warranty Information
Operation: Rework weld studs on vehicle floor in right foot well (02-6762)
Damage Code | Operation Number | Labor Time (hrs.) |
61 902 03 7 | 02-6762 | 1.4 |
Includes: Disconnect/connect ground line of on-board electrical system battery; remove/install right front seat; remove/install right front door sill; remove/install trims under right instrument panel; remove/install right front floor covering; remove/install wear protection cover
Note
Operation Number labor times are subject to change.
P-RC-2019060007
TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Gregory Gunther, Department Manager, Vehicle Compliance and Analysis, Engineering Services |
RE: Recall Campaign Initial Notification Water Ingress into Right Side of Passenger Compartment MY20 167 (GLE-Class) |
DATE: June 21,2019 |
IMPORTANT RECALL CAMPAIGN INFORMATION
Please see the attached documents related to the campaign listed above.
Please note that all customer inquiries should be directed to the Customer Assistance Center at 1-800-FOR-MERCEDES.
Sincerely,
Gregory Gunther
Department Manager, Vehicle Compliance & Analysis
Campaign No. : | NHTSA ID | Campaign Desc. : | Right Side Water Ingress | |
TBA | 19V459 | PEND WTR INGR | ||
This is to notify you of a new Recall Campaign regarding the potential of water ingress into the right side of the passenger compartment on 753 Model Year (“MY”) 2020 GLE-Class (167 platform) vehicles. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. Affected VINs will be flagged in VMI as “PENDING” on June 21, 2019. | ||||
Background | ||||
Issue | Daimler AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2020 GLE-Class vehicles (167 platform), a welding stud on the main floor may not have been welded according to specification. As a result, a small hole may be present in the main floor in the vehicle’s underbody. If the vehicle were to attempt to cross standing water over 15 inches deep, some water could enter the vehicle passenger compartment via the hole in the main floor on the right-side of the vehicle. If sufficient amounts of water enter the vehicle, several electrical contacts could be affected, impacting their functionality. Additionally, a risk of engine stalling cannot be ruled out, increasing the risk of a crash. | |||
What We’re Doing | MBUSA will conduct a voluntary recall. An authorized Mercedes-Benz dealer will seal the hole in the main floor on the affected vehicles. | |||
Parts | Parts are not yet available. An additional notification will be sent once the parts are available for repairs. | |||
Vehicles Affected | ||||
Vehicle Model Year(s) | 2020 | |||
Vehicle Model | GLE-Class | |||
Vehicle Populations | ||||
Total Recall Population | 753 | |||
Total Vehicles in Dealer Inventory | 15 | |||
Given this notice, it is a violation of Federal law for a dealer to sell or lease any new MY20 GLE-Class vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Once the remedy is available, the vehicles will be flagged as “OPEN” and Work Instructions will be available in Star TekInfo Once the repair is complete, the vehicle may be sold or leased.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for car rental companies to rent new MY20 GLE-Class vehicles covered by this notification until the vehicle has been repaired. |
||||
Next Steps/Notes | ||||
Customer Notification Timeline | Customer letters will be mailed approximately one week after the remedy becomes available. | |||
AOMS/SOMS | AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | |||
Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer. | |||
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES. |
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
MERCEDES BENZ | GLE350 | 2020 |
MERCEDES-BENZ | GLE450 | 2020 |
11 Associated Documents
Recall Quarterly Report #2, 2019-4
RCLQRT-19V459-9052.PDF 211.248KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V459-2131.pdf 592.892KB
Recall 573 Report – AMENDMENT 1
RCLRPT-19V459-5171.PDF 216.17KB
Recall 573 Report – AMENDMENT 2
RCLRPT-19V459-6662.PDF 216.133KB
Defect Notice 573 Report
RCLRPT-19V459-4308.PDF 216.165KB
Recall Acknowledgement
RCAK-19V459-8410.pdf 244.779KB
Remedy Instructions and TSB
RCRIT-19V459-4519.pdf 200.295KB
Manufacturer Notices(to Dealers, etc.) – Recall Campaign Launch Notification. Water Ingress into Right Side of Passenger Compartment MY20 167 (GLE-Class)
Manufacturer Notices(to Dealers, etc.) – Recall Campaign Initial Notification Water Ingress into Right Side of Passenger Compartment MY20 167 (GLE-Class)
RCMN-19V459-1988.pdf 216.596KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V459-7256.PDF 211.148KB
Recall Quarterly Report #3, 2020-1
RCLQRT-19V459-1927.PDF 211.335KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V459&docType=RCL
- For professional use only – not for retail sale
- Fast curing and skins over quickly—can be painted 60 minutes after application
- Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints
- Flexible, non-staining, and non-sagging product that will not crack or shrink
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- 2 Pack Value & Complete Kit - Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps - Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready - Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance - High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- EASY APPLICATIONS: Brushable and paintable consistency
- HIGH ADHESION: Works on both bare metal and painted surfaces
- FAST SKINNING: Starts in about 10 to 15 minutes
- STAYS IN PLACE: Less likely to drip, sag or run out of gaps being sealed
- NON-STAINING: For all-purpose autobody joint and seam sealing
- SINGLE COMPONENT FORMULA: Adheres well to bare metal, primed metal and painted surfaces
- MOISTURE CURING PROPERTY: Provides excellent performance in high heat and humidity environments
- NON-SHRINKING, NON-CRACKING: Remains flexible and offers superior results to solvent-based sealers
- QUICK PAINTABILITY: Allows painting after 30-45 minutes
- THICK CONSISTENCY: Fills large voids and can be smoothed to a featheredge or brushed
- Brushable Seam Sealer is fast drying and designed exclusively for automotive uses.
- This product remains flexible and will not crack, harden, sink or sag.
- Brushable Seam Sealer is easily applied with a brush and holds a perfect brush mark to match that O.E.M. seam.
- It provides excellent adhesion, seals cracks, crevices, body seams and is ideal for use on all lap and flange seams and joints.
- Brushable Seam Sealer is paintable in 30 to 60 minutes and comes in a light gray color.
- Vehicle Body Repair: Automotive Seam Sealer for all-purpose auto body gap filling,joint and seam sealing.Protect your vehicle from rust and corrosion with these automotive seam sealers.Ideal for car ,truck, boat, RVs.
- High Adhesive & Durable - designed this urethane sealer for a range of materials, including bare metal or painted surfaces.
- Don't Shrink and Crack - low odor single component formula auto seam sealer provides flexible,non-staining, and non-sagging.
- Easy to Use - Fast cure time.You can paint over the undercoating . For best results, allow 24 hours and scuff before painting.
- Water and Corrosion Proof - Use interior or exterior to prevent weather from eroding your car.Service Temperature -40 to 170 °F (-40 to 77 °C).High heat performance.
- Seals Cracks, Crevices And Body Seams, Plus Waterproofs And Insulates
- Flexible - Will Not Shrink, Harden Or Crack
- Seals Cracks, Crevices And Body Seams
- For Firewalls, Floor Pans, Trunk Seams, Fender Extensions, Taillight Openings
- Paintable In 30 Minutes
- 𝗦𝗲𝗮𝗺𝗹𝗲𝘀𝘀 𝗔𝗱𝗵𝗲𝘀𝗶𝗼𝗻 𝗳𝗼𝗿 𝗣𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹𝘀: Achieve unmatched durability with Akfix P645, the perfect automotive seam sealer for experts. It provides a professional finish thanks to over-paintable and sandable features after full curing.
- 𝗘𝗻𝗱𝘂𝗿𝗶𝗻𝗴 𝗙𝗹𝗲𝘅𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Trust in the permanently flexible bond of Akfix P645, designed for the dynamic demands of automotive restoration and construction.
- 𝗘𝗳𝗳𝗼𝗿𝘁𝗹𝗲𝘀𝘀 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻: With its non-sag and non-sticky formula, Akfix P645 ensures a clean application every time, without attracting dirt.
- 𝗨𝗻𝗿𝗶𝘃𝗮𝗹𝗲𝗱 𝗗𝘂𝗿𝗮𝗯𝗶𝗹𝗶𝘁𝘆: Especially designed for body construction of cars, containers, caravans and projects that require durability in the automotive and construction industry. Formulated to resist the effects of aging to better perform.
- 𝗥𝗲𝗮𝗱𝘆 𝗧𝗼 𝗨𝘀𝗲: Akfix P645 sealant is packaged in a user-friendly cartridge, compatible with electric, pneumatic, or manual application guns, facilitating precise and effortless adhesive paste placement.
- Polyurethane Seam Sealer/Adhesive Compound is a one component, moisture-cure sealant designed exclusively for automotive uses. Automotive Seam Sealer Black - RV Roof Sealant
- This product cures under the effect of atmospheric humidity to form a permanently flexible and resistant joint.
- This product is a high quality elastomeric sealant formulated to combine high flexibility with high ultimate strength, permanent bonds and long service life.
- This product provides excellent adhesion to a wide variety of substrates and comes in an easy to use, non-sag consistency suitable for easy application with a standard caulking gun in both horizontal and vertical automotive joints.
- Easy application, ready to use, no mixing required
Last update on 2024-04-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.