2018030003 – Replace Body Manufacturer Information Label – 2016-2017 Mercedes-Benz Sprinter 2500 & 3500

February 15, 2018

Incorrect Unloaded Vehicle Weight on Label

The incorrect UVW label can result in final stage manufacturers exceeding the maximum vehicle weight once the vehicle is completed. A vehicle that exceeds its maximum weight has an increased risk of a crash.

 

NHTSA Campaign Number: 18V113

Manufacturer Daimler Vans USA, LLC

Components EQUIPMENT

Potential Number of Units Affected 17

 

Summary

Daimler Vans USA, LLC (DVUSA) is recalling certain 2016-2017 Mercedes-Benz Sprinter 2500 and Sprinter 3500 vehicles, equipped with folding seats (sales code S20). The unloaded vehicle weight (UVW) label on these incomplete vehicles may be incorrect.

 

Remedy

DVUSA will notify owners, and dealers will replace the UVW label and inspect the vehicle to make sure that it is not overloaded, free of charge. The recall began on April 3, 2018. Owners may contact DVUSA customer service at 1-877-762-8267.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Daimler Vans Recalls

---

TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers	FROM: Michael Scott, Regulatory Mgmt and Campaigns
RE: Recall Campaign Launch Notification MY16 and MY17 906 (Sprinter) Replace Body Manufacturer Information Label	DATE: March 12, 2018

 

IMPORTANT NEW RECALL CAMPAIGN INFORMATION

---

RECALL CAMPAIGN LAUNCH NOTIFICATION

March 12, 2018

---

Campaign No. :	Campaign	Replace Manufacturer Information Label
2018030003	NC3KLAPPSI
This is to notify you of the upcoming Recall Campaign to replace the information label regarding the unloaded vehicle weight (UVW) on approximately 17 MY16 and MY 17 Mercedes-Benz Sprinter (906) vehicles. The recall campaign will be visible on the  www.safercar.gov website and may generate questions from customers. All affected VINs are flagged as “OPEN” in VMI on March 12, 2018.
Background
Issue	Daimler AG (DAG), the manufacturer of Mercedes-Benz Vans, has determined that on certain Mercedes-Benz Sprinter vehicles with folding seats (Sales Code S20) and a total permissible weight of under 10,000 lbs., the information label for subsequent manufacturers / final stage manufacturers contains incorrect information regarding the unloaded vehicle weight (UVW).
Parts	The Global Logistics Center will be stocking this part in Germany and will fulfill orders via VOR FedEx based on actual demand.
What We’re Doing	An authorized Mercedes-Benz Sprinter dealer will replace the label on the vehicles affected and check that the UVW of these vehicles is not exceeded. Pursuant to 49 C.F.R. § 577.11(e), there is no need for pre-notice reimbursement to owners since all involved vehicles remain covered under the New Vehicle Limited Warranty.
Vehicles Affected
Vehicle Model Year(s)	2016 and 2017
Vehicle Model	Mercedes-Benz (2500, 3500)
Vehicle Populations
Total Recall Population	17
Dealer Inventory	8
Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new MY16 and MY17 Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new MY16 and MY17 Sprinter vehicles covered by this notification until the vehicle has been repaired.
Next Steps/Notes
Next Steps/Notes	Customer letters will be mailed in early April, 2018.
AOMS/SOMS	AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet Partners	This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer.
While we regret any inconvenience this may cause, MBUSA is determined to maintain a high level of vehicle quality and customer satisfaction. Please refer all customer inquiries to the Customer Assistance Center at 1-800-FOR-MERCEDES.

 

---

Campaign No. 2018030003, March 2018

TO:	Model 906, Model Years 2016 – 2017
SUBJECT:	Replace Body Manufacturer Information Label

 

Daimler AG, the manufacturer of Mercedes-Benz Sprinter vehicles, has determined on certain Mercedes-Benz Sprinter vehicles with folding seats and a total permissible weight of under 10,000 lbs., the information label for subsequent/ final stage manufacturers contains incorrect information regarding the unloaded vehicle weight (UVW). Should the maximum UVW be exceeded, certain side impact protection requirements might not be met. This could result in an increased risk of injury in the event of a crash. An authorized Mercedes-Benz Sprinter dealer we will check that the UVW of your vehicle is not exceeded and replace the UVW label.

Prior to performing this Recall Campaign:

• Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
• Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 17 vehicles are involved.

Order No. V-RC-2018030003
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records.

---

Operation No.	Operation text	Time (hrs.)	Damage Code	Code
02-2235	Operations: Replace body manufacturer information label	0.2	58 916 56 7	NC3KLAPPSI

 

Figure 1. Information Sticker

 

Check

1

Check whether the vehicle is affected by the measure

For authorized Mercedes‑Benz service partners, only the entry in the “Extended VEGA Application” (EVA) system, in the “Current” tab is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.

 

Replace

2

Replace information label (Figure 1) 000 588 00 84 00 Heat gun

Bonding surface must be absolutely free of dust and grease. Otherwise, a sufficient degree of adhesion cannot be assured. To do so, use suitable tool (e.g. heat gun) to remove information label (Figure 1) and remove any adhesive residue using suitable cleaning agent.

 

Measure using pointer device

3

Determine vehicle curb weight

To determine the vehicle’s curb weight, weigh the vehicle when unladen. If curb weight of the vehicle is greater than 6724 lbs., generate TIPS case.

 

Parts ordering note

Part no.	Designation	Quantity
A 906 584 74 06 26	Information sticker	1

 

---

4 Affected Products

Vehicles

MAKE	MODEL	YEAR
MERCEDES BENZ	SPRINTER 2500	2016-2017
MERCEDES BENZ	SPRINTER 3500	2016-2017

 

---

7 Associated Documents

Recall Acknowledgement

RCAK-18V113-4752.pdf 246.059KB

 

---

Defect Notice 573 Report

RCLRPT-18V113-1207.pdf 217.042KB

 

---

Manufacturer Notices(to Dealers,etc)

RCMN-18V113-5615.pdf 751.417KB

 

---

Manufacturer Notices(to Dealers,etc)

RCMN-18V113-0624.pdf 213.51KB

 

---

Recall Quarterly Report #3, 2018-4

RCLQRT-18V113-9899.PDF 211.306KB

 

---

Recall Quarterly Report #4, 2019-1

RCLQRT-18V113-8253.PDF 211.417KB

 

---

Recall Quarterly Report #5, 2019-2

RCLQRT-18V113-5653.PDF 211.522KB

 

---

Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V113&docType=RCL

---

 

Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.